Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing
Polymers · 10.07.2023 · 15 (14) · 2993
DOI: 10.3390/polym15142993 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.07.2023. Verfasst von Syed Hammad Mian und 3 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The authors extend their appreciation to the King Salman center For Disability Research for funding this work through Research Group no KSRG-2022-060, King Salman center For Disability Research.
Abstract (Originalsprache)
Three-dimensional (3D) printed splints must be lightweight and adequately ventilated to maximize the patient’s convenience while maintaining requisite strength. The ensuing loss of strength has a substantial impact on the transformation of a solid splint model into a perforated or porous model. Thus, two methods for making perforations—standard approach and topological optimization—are investigated in this study. The objective of this research is to ascertain the impact of different perforation shapes and their distribution as well as topology optimization on the customized splint model. The solid splint models made of various materials have been transformed into porous designs to evaluate their strength by utilizing Finite Element (FE) simulation. This study will have a substantial effect on the designing concept for medical devices as well as other industries such as automobiles and aerospace. The novelty of the research refers to creating the perforations as well as applying topology optimization and 3D printing in practice. According to the comparison of the various materials, PLA had the least amount of deformation and the highest safety factor for all loading directions. Additionally, it was shown that all perforation shapes behave similarly, implying that the perforation shape’s effect is not notably pronounced. However, square perforations seemed to perform the best out of all the perforation shape types. It was also obvious that the topology-optimized hand splint outperformed that with square perforations. The topology-optimized hand splint weighs 26% less than the solid splint, whereas the square-perforated hand splint weighs roughly 12% less. Nevertheless, the user must choose which strategy (standard perforations or topology optimization) to employ based on the available tools and prerequisites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia.
- King Salman Center for Disability Research, Riyadh 11614, Saudi Arabia.
ORCID-Profile: Syed Hammad Mian, Usama Umer, Hisham Alkhalefah
Förderung
- The authors extend their appreciation to the King Salman center For Disability Research for funding this work through Research Group no KSRG-2022-060
- King Salman center For Disability Research
Zitieren
APA
Mian, S. H., Umer, U., Moiduddin, K., & Alkhalefah, H. (2023). Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing. Polymers, 15(14), 2993. https://doi.org/10.3390/polym15142993
Vancouver
Mian SH, Umer U, Moiduddin K, Alkhalefah H. Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing. Polymers. 2023;15(14):2993. doi:10.3390/polym15142993
BibTeX
@article{Mian2023,
author = {Mian, Syed Hammad and Umer, Usama and Moiduddin, Khaja and Alkhalefah, Hisham},
title = {Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing},
journal = {Polymers},
year = {2023},
volume = {15},
number = {14},
pages = {2993},
doi = {10.3390/polym15142993}
}
EUVIMED