EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Correction of Temperature from Infrared Cameras for More Precise As-Is 3D Thermal Models of Buildings

Antonio Adán, Víctor Pérez, Amanda Ramón, Francisco J. Castilla

Applied Sciences · 02.06.2023 · 13 (11) · 6779

DOI: 10.3390/app13116779 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.06.2023. Verfasst von Antonio Adán und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, Ministry of Science and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper studies how to create precise 3D thermal maps of building interiors by correcting the raw apparent temperature values yielded by the thermal cameras. This matter has not, to date, been dealt with in the literature, which leads us to conclude that the current methodologies that obtain thermal point clouds are incomplete and imprecise. Without a suitable correction, any further energy parameter calculation obtained from the thermal point cloud is incorrect. This paper presents a method that deals with important aspects to be corrected, such as the repeatability of thermal cameras, the use of the true emissivity of the materials sensed, and the inclusion of the reflected radiant energy caused by the environment. The method has been successfully tested in several indoor scenes using a thermal scanning platform. The results show that significant corrections of up to 8% of the raw temperature values must be carried out in the final thermal model, thus justifying the need for the correction. As an application of the method, an empirical calculation and a comparison of transmittances with and without temperature corrections are presented at the end of the paper. In this case, the relative errors with respect to the average nominal U-value decrease from 94% to 11%. The general conclusion is that precise calculations of energy parameters in which infrared cameras are involved must take these corrections to temperature into account.

Förderung

  • European Regional Development Fund
  • Ministry of Science and Innovation

Zitieren

APA

Adán, A., Pérez, V., Ramón, A., & Castilla, F. J. (2023). Correction of Temperature from Infrared Cameras for More Precise As-Is 3D Thermal Models of Buildings. Applied Sciences, 13(11), 6779. https://doi.org/10.3390/app13116779

Vancouver

Adán A, Pérez V, Ramón A, Castilla FJ. Correction of Temperature from Infrared Cameras for More Precise As-Is 3D Thermal Models of Buildings. Applied Sciences. 2023;13(11):6779. doi:10.3390/app13116779

BibTeX
@article{Adn2023,
  author = {Adán, Antonio and Pérez, Víctor and Ramón, Amanda and Castilla, Francisco J.},
  title = {Correction of Temperature from Infrared Cameras for More Precise As-Is 3D Thermal Models of Buildings},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {11},
  pages = {6779},
  doi = {10.3390/app13116779}
}
Kostenlos starten →