EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Infrared Camera Geometric Calibration: A Review and a Precise Thermal Radiation Checkerboard Target

Ahmed ElSheikh iD, Bassam A Abu-Nabah iD, Mohammad O Hamdan iD, Gui-Yun Tian iD

Sensors · 26.03.2023 · 23 (7) · 3479

DOI: 10.3390/s23073479 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 26.03.2023. Verfasst von Ahmed ElSheikh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, American University of Sharjah, Sharjah 26666, United Arab Emirates. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: American University of Sharjah.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Different infrared (IR) planar geometric calibration targets have been developed over the years that exploit a well-established and flexible optical camera geometric calibration procedure following the pinhole approximation. This geometric calibration is typically neglected in IR cameras, due to the relatively low resolution of thermal images and the complex IR targets needed for the geometric calibration in comparison to the optical targets. In this study, a thorough literature review of numerous IR camera geometric calibration targets, along with their respective outcomes, were summarized and leveraged to deliver a practical checkerboard target for less experienced end users, while offering the lowest reprojection errors. It was concluded that the fabrication of high emissivity contrast and precise square points of intersection within a checkerboard pattern extends the accuracy of capturing these control points in a thermal image for an optimized IR camera geometric calibration. Accordingly, two simple planar checkerboard targets were fabricated using laser engraving and ultraviolet (UV) printing technologies on a polished stainless steel (SS304) plate. The UV-printed checkerboard target on a polished metallic alloy delivered the lowest mean reprojection error (MRE) of 0.057 pixels and the lowest root mean square error (RMSE) of reprojection of 0.063 pixels, with a standard deviation lower than 0.003 pixels. The UV-printed design offers better accuracy than any other checkerboard calibration target, and comparable results to the best prominent circular pattern results reported in the literature.

Schlagwörter

Stichwörter der Autor:innen

geometric calibrationinfraredlens distortionthermography

Autor:innen und Institutionen

  • Department of Mechanical Engineering, American University of Sharjah, Sharjah 26666, United Arab Emirates.
  • School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK.

ORCID-Profile: Ahmed ElSheikh, Bassam A Abu-Nabah, Mohammad O Hamdan, Gui-Yun Tian

Förderung

  • American University of Sharjah

Zitieren

APA

ElSheikh, A., Abu-Nabah, B. A., Hamdan, M. O., & Tian, G. Y. (2023). Infrared Camera Geometric Calibration: A Review and a Precise Thermal Radiation Checkerboard Target. Sensors, 23(7), 3479. https://doi.org/10.3390/s23073479

Vancouver

ElSheikh A, Abu-Nabah BA, Hamdan MO, Tian GY. Infrared Camera Geometric Calibration: A Review and a Precise Thermal Radiation Checkerboard Target. Sensors. 2023;23(7):3479. doi:10.3390/s23073479

BibTeX
@article{ElSheikh2023,
  author = {ElSheikh, Ahmed and Abu-Nabah, Bassam A and Hamdan, Mohammad O and Tian, Gui-Yun},
  title = {Infrared Camera Geometric Calibration: A Review and a Precise Thermal Radiation Checkerboard Target},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {7},
  pages = {3479},
  doi = {10.3390/s23073479}
}
Kostenlos starten →