The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process
Applied Sciences · 28.04.2023 · 13 (9) · 5519
DOI: 10.3390/app13095519 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 28.04.2023. Verfasst von Yang Bao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Science and Technology Innovations Project of the Outstanding Doctor of Xinjiang University, Technology Innovation Team for Robots and Intelligent Equipment, General Fund Program of Xinjiang.
Abstract (Originalsprache)
Thick-walled X80 pipelines for oil and gas transportation are difficult to relocate due to their large size. In the process of narrow-gap overhead welding, welding defects, such as bulges and lack of sidewall fusion, can appear easily. To avoid these defects and to improve the welding quality of thick-walled pipelines, the GMAW welding method is adopted in this paper. The formation characteristics of the weld and the influence of arc oscillation parameters, such as the oscillation width and sidewall dwell time, on the formation process of narrow-gap overhead welding seams are studied. In this research, it was found that, in the NG-GMAW overhead welding position, there was a downward trend in the middle of the formed surface of the weld pool. Defects, such as finger-shaped penetrations and lack of sidewall fusion, were prone to occur due to gravity. The increased oscillation width was beneficial for reducing the protrusion in the middle of the weld seam, but an excessive oscillation width can easily cause undercut defects. The sidewall dwell time has little effect on the protrusion in the middle of the weld seam, but it can increase sidewall penetration, thereby avoiding the occurrence of incomplete sidewall penetration.
Förderung
- The Science and Technology Innovations Project of the Outstanding Doctor of Xinjiang University
- Technology Innovation Team for Robots and Intelligent Equipment
- General Fund Program of Xinjiang
Zitieren
APA
Bao, Y., Xue, R., Zhou, J., Liu, H., & Xu, Y. (2023). The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process. Applied Sciences, 13(9), 5519. https://doi.org/10.3390/app13095519
Vancouver
Bao Y, Xue R, Zhou J, Liu H, Xu Y. The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process. Applied Sciences. 2023;13(9):5519. doi:10.3390/app13095519
BibTeX
@article{Bao2023,
author = {Bao, Yang and Xue, Ruilei and Zhou, Jianping and Liu, Hongsheng and Xu, Yan},
title = {The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {9},
pages = {5519},
doi = {10.3390/app13095519}
}
EUVIMED