Applying Statistical Models to Optimize the Weld Bead Geometry in the Vertical Oscillation Arc Narrow Gap All-Position GMAW
Applied Sciences · 03.06.2023 · 13 (11) · 6801
DOI: 10.3390/app13116801 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 03.06.2023. Verfasst von Hongsheng Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of Xinjiang, Science and Technology Innovations Project of the Outstanding Doctor of Xinjiang University, Technology Innovation Team for Robots and Intelligent Equipment.
Abstract (Originalsprache)
Vertical oscillation arc welding for narrow gap gas metal arc welding (NG-GMAW) has a relatively simple structure, and it is widely used in all-position pipeline field welding. However, it has some shortcomings, such as incomplete fusion defects on the sidewall and interlayer. Aiming at resolving these shortcomings, a mathematical model is proposed to obtain appropriate welding parameters in different positions. In this model, the response surface methodology (RSM) based on the central composite design (CCD) was developed to study the interactions between welding parameters and the weld bead geometry. Then the analysis of variance (ANOVA) was used to evaluate the accuracy and significance of the proposed model. Finally, experiments were carried out in flat, vertical, and overhead positions to obtain the optimal parameters. The macroscopic metallography of the transversal section of the weld bead under the optimizing welding parameters showed that the weld beads were free of defects in the sidewall and interlayers.
Förderung
- National Natural Science Foundation of Xinjiang
- Science and Technology Innovations Project of the Outstanding Doctor of Xinjiang University
- Technology Innovation Team for Robots and Intelligent Equipment
Zitieren
APA
Liu, H., Xue, R., Zhou, J., Bao, Y., & Xu, Y. (2023). Applying Statistical Models to Optimize the Weld Bead Geometry in the Vertical Oscillation Arc Narrow Gap All-Position GMAW. Applied Sciences, 13(11), 6801. https://doi.org/10.3390/app13116801
Vancouver
Liu H, Xue R, Zhou J, Bao Y, Xu Y. Applying Statistical Models to Optimize the Weld Bead Geometry in the Vertical Oscillation Arc Narrow Gap All-Position GMAW. Applied Sciences. 2023;13(11):6801. doi:10.3390/app13116801
BibTeX
@article{Liu2023,
author = {Liu, Hongsheng and Xue, Ruilei and Zhou, Jianping and Bao, Yang and Xu, Yan},
title = {Applying Statistical Models to Optimize the Weld Bead Geometry in the Vertical Oscillation Arc Narrow Gap All-Position GMAW},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {11},
pages = {6801},
doi = {10.3390/app13116801}
}
EUVIMED