EUVIMEDEUVIMED entdecken
Crossref

Influence of Welding Process Parameters on Mechanical Properties of Coated Fabric Weld Seams

Yingying Zhang, Lingyu Sheng, Shanshan Xu, Jianwei Zhang, Junhao Xu, Chen Xu, Yushuai Zhao

Journal of Testing and Evaluation · 01.05.2027

DOI: 10.1520/jte20250477 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Testing and Evaluation, online erschienen am 09.11.2026. Verfasst von Yingying Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Qinglan Project of Jiangsu Province of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Weld seams in membrane structures exhibit a significantly higher failure probability than the base material and often act as initiation points for structural damage. Their mechanical properties are strongly influenced by welding process parameters, including temperature, time, and pressure. This work investigated the effects of welding parameters on the mechanical performance of Polyvinyl Chloride (PVC)- and Polytetrafluoroethylene (PTFE)-coated fabric weld seams through orthogonal experiments, analyzing the failure modes, mechanical characteristics, and microstructural variations of three weld configurations to reveal the failure mechanism and establish a high-accuracy strength prediction model. Joint efficiency is defined as the ratio of the ultimate bearing capacity of welded joints to that of the base material. For PVC-coated fabrics, the lap weld seams reached a joint efficiency of 108.23 %, with 78 % of specimens failing in the base material. The joint efficiency of single-covered and double-covered butt weld seams dropped to a minimum of 78.54 %, attributed to stress concentration and bending effects. For PTFE-coated fabrics, the maximum joint efficiency reached 101.57 %. The error of the established strength prediction model is less than or equal to 5 %. For the optimal parameter combination (380°C/80 s/0.5 MPa), the predicted strength is 6,954.98 N, with an error of only 0.89 % compared to the measured value.

Förderung

  • Qinglan Project of Jiangsu Province of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Sheng, L., Xu, S., Zhang, J., Xu, J., Xu, C., & Zhao, Y. (2027). Influence of Welding Process Parameters on Mechanical Properties of Coated Fabric Weld Seams. Journal of Testing and Evaluation. https://doi.org/10.1520/jte20250477

Vancouver

Zhang Y, Sheng L, Xu S, Zhang J, Xu J, Xu C, et al. Influence of Welding Process Parameters on Mechanical Properties of Coated Fabric Weld Seams. Journal of Testing and Evaluation. 2027. doi:10.1520/jte20250477

BibTeX
@article{Zhang2027,
  author = {Zhang, Yingying and Sheng, Lingyu and Xu, Shanshan and Zhang, Jianwei and Xu, Junhao and Xu, Chen and Zhao, Yushuai},
  title = {Influence of Welding Process Parameters on Mechanical Properties of Coated Fabric Weld Seams},
  journal = {Journal of Testing and Evaluation},
  year = {2027},
  doi = {10.1520/jte20250477}
}
Kostenlos starten →