Uncertainty Modeling of Fouling Thickness and Morphology on Compressor Blade
Aerospace · 16.06.2025 · 12 (6) · 547
DOI: 10.3390/aerospace12060547 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 16.06.2025. Verfasst von Limin Gao und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To describe the fouling characteristics of compressor blades, fouling is categorized into dense and loose layers to characterize thickness and rough structures. An uncertainty model for dense fouling layer thickness distribution is constructed using the numerical integration and the Karhunen–Loève (KL) expansion method, while the Fouling Longuet-Higgins (FLH) model is proposed to address the uncertainty of loose fouling layer roughness. The FLH model effectively simulates the morphology characteristics of actual blade fouling and elucidates how parameters influence fouling roughness, morphology, and randomness. Based on the uncertainty modeling method, models for dense fouling layer thickness and loose fouling layer morphology are constructed, followed by numerical calculations and aerodynamic performance uncertainty quantification. Results indicate a 75.8% probability of aerodynamic performance degradation due to a dense fouling layer and a 97.2% probability related to the morphology uncertainty of a loose fouling layer when the roughness is 50 μm. This underscores that a mere focus on roughness is inadequate for characterizing blade fouling, and a comprehensive evaluation must also incorporate the implications of rough structures on aerodynamic performance.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Gao, L., Tu, P., Yang, G., & Yang, S. (2025). Uncertainty Modeling of Fouling Thickness and Morphology on Compressor Blade. Aerospace, 12(6), 547. https://doi.org/10.3390/aerospace12060547
Vancouver
Gao L, Tu P, Yang G, Yang S. Uncertainty Modeling of Fouling Thickness and Morphology on Compressor Blade. Aerospace. 2025;12(6):547. doi:10.3390/aerospace12060547
BibTeX
@article{Gao2025,
author = {Gao, Limin and Tu, Panpan and Yang, Guang and Yang, Song},
title = {Uncertainty Modeling of Fouling Thickness and Morphology on Compressor Blade},
journal = {Aerospace},
year = {2025},
volume = {12},
number = {6},
pages = {547},
doi = {10.3390/aerospace12060547}
}
EUVIMED