EUVIMEDEUVIMED entdecken
Crossref

A Preconditioner-Based Data-Driven Polynomial Expansion Method: Application to Compressor Blade With Leading Edge Uncertainty

Haohao Wang, Limin Gao, Guang Yang, Ruiyu Li, Baohai Wu

Journal of Engineering for Gas Turbines and Power · 01.11.2024 · 146 (11)

DOI: 10.1115/1.4065787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering for Gas Turbines and Power, online erschienen am 04.07.2024. Verfasst von Haohao Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In engineering practice, the amount of measured data is often scarce and limited, posing a challenge in uncertainty quantification (UQ) and propagation. Data-driven polynomial chaos (DDPC) is an effective way to tackle this challenge. However, the DDPC method faces problems from the lack of robustness and convergence difficulty. In this paper, a preconditioner-based data-driven polynomial chaos (PDDPC) method is developed to deal with UQ problems with scarce measured data. Two numerical experiments are used to validate the computational robustness, convergence property, and application potential in case of scarce data. Then, the PDDPC is first applied to evaluate the uncertain impacts of real leading edge (LE) errors on the aerodynamic performance of a two-dimensional compressor blade. Results show that the overall performance of compressor blade is degraded and there is a large performance dispersion at off-design incidence conditions. The actual blade performance has a high probability of deviating from the nominal performance. Under the influence of uncertain LE geometry, the probability distributions of the total pressure loss coefficient and static pressure ratio have obvious skewness characteristics. Compared with the PDDPC method, the UQ results obtained by the fitted Gaussian and Beta probability distributions seriously underestimate the performance dispersion of compressor blade. The mechanism analysis illustrates that the large flow variation around the leading edge is the main reason for the overall performance degradation and the fluctuations of the entire flow field.

Zitieren

APA

Wang, H., Gao, L., Yang, G., Li, R., & Wu, B. (2024). A Preconditioner-Based Data-Driven Polynomial Expansion Method: Application to Compressor Blade With Leading Edge Uncertainty. Journal of Engineering for Gas Turbines and Power, 146(11). https://doi.org/10.1115/1.4065787

Vancouver

Wang H, Gao L, Yang G, Li R, Wu B. A Preconditioner-Based Data-Driven Polynomial Expansion Method: Application to Compressor Blade With Leading Edge Uncertainty. Journal of Engineering for Gas Turbines and Power. 2024;146(11). doi:10.1115/1.4065787

BibTeX
@article{Wang2024,
  author = {Wang, Haohao and Gao, Limin and Yang, Guang and Li, Ruiyu and Wu, Baohai},
  title = {A Preconditioner-Based Data-Driven Polynomial Expansion Method: Application to Compressor Blade With Leading Edge Uncertainty},
  journal = {Journal of Engineering for Gas Turbines and Power},
  year = {2024},
  volume = {146},
  number = {11},
  doi = {10.1115/1.4065787}
}
Kostenlos starten →