EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of a computational strategy to model transitory injection in rotating detonation combustors

Pierre Hellard, Thomas Gaillard, Dmitry Davidenko

Frontiers in Aerospace Engineering · 2023

DOI: 10.3389/fpace.2023.1127671 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Aerospace Engineering, 2023. Verfasst von Pierre Hellard und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The efficiency of a Rotating Detonation Combustor (RDC) strongly depends on the transitory injection process of fresh reactants in the combustion chamber: poor propellant mixing induces losses of combustion efficiency and consequently low detonation speed and unstable detonation propagation. Moreover, dilution of fresh reactants with burnt gases during injection increases the deflagration losses and decreases the pressure gain provided by the detonation. Numerical simulation can help design an efficient injector to reduce these losses. In this study, the modeling strategy previously proposed by ONERA to simulate the transitory injection process is applied to two existing experimental RDC (from Nagoya University and TU Berlin) and one in-development RDC from ONERA. The computational domain represents only one injection element, convenient for a parametric study at low computational cost. A custom initial condition is used to model the expansion process of burnt gases past a detonation wave. The initial condition parameters are discussed and a method is proposed to correctly set them. The TU Berlin RDC is studied in more detail: mixing efficiency up to 70% is obtained, and 5% of deflagration losses are estimated according to the assumptions of the simulation. Based on the numerical results, detonation speed was evaluated at various distances from the injection plane taking into account the heterogeneities of the fresh mixture. The measured speed lies within the predicted range.

Zitieren

APA

Hellard, P., Gaillard, T., & Davidenko, D. (2023). Evaluation of a computational strategy to model transitory injection in rotating detonation combustors. Frontiers in Aerospace Engineering. https://doi.org/10.3389/fpace.2023.1127671

Vancouver

Hellard P, Gaillard T, Davidenko D. Evaluation of a computational strategy to model transitory injection in rotating detonation combustors. Frontiers in Aerospace Engineering. 2023. doi:10.3389/fpace.2023.1127671

BibTeX
@article{Hellard2023,
  author = {Hellard, Pierre and Gaillard, Thomas and Davidenko, Dmitry},
  title = {Evaluation of a computational strategy to model transitory injection in rotating detonation combustors},
  journal = {Frontiers in Aerospace Engineering},
  year = {2023},
  doi = {10.3389/fpace.2023.1127671}
}
Kostenlos starten →