EUVIMEDEUVIMED entdecken
Crossref

Evaluation of Cooling Requirements for Rotating Detonation Combustors

Umberto Sandri, Shreyas Ramanagar Sridhara, Antonio Andreini, Myles D. Bohon, A. Picchi, B. Facchini

Journal of Turbomachinery · 01.05.2024 · 146 (5)

DOI: 10.1115/1.4064260 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 16.01.2024. Verfasst von Umberto Sandri und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the last decade, the rotating detonation combustor (RDC) has received growing attention among the different pressure gain combustion concepts due to the simplicity of the design and the potential ease of integration in gas turbines. However, multiple technological challenges are still associated with its development. Researchers have pointed out concerns related to the heat loads determined by the high temperature and the complex flow field occurring in this kind of combustion chamber based on a small but meaningful set of experimental and numerical results. An investigation of the open literature has shown a strong sensitivity of the heat loads with multiple designs and operational parameters. The aim of this work is to provide a fundamental review of the primary drivers affecting heat load in a typical RDC in order to define basic cooling requirements for possible actual design of the combustor. Along with this, a simplified approach has been implemented for the estimation of the requirements for cold side convection cooling with respect to different heat load scenarios, shedding light on the compatibility of pure convection cooling for rotating detonation combustors. Finally, the results are used to determine guidelines for the design of a cooled and efficient RDC.

Zitieren

APA

Sandri, U., Sridhara, S. R., Andreini, A., Bohon, M. D., Picchi, A., & Facchini, B. (2024). Evaluation of Cooling Requirements for Rotating Detonation Combustors. Journal of Turbomachinery, 146(5). https://doi.org/10.1115/1.4064260

Vancouver

Sandri U, Sridhara SR, Andreini A, Bohon MD, Picchi A, Facchini B. Evaluation of Cooling Requirements for Rotating Detonation Combustors. Journal of Turbomachinery. 2024;146(5). doi:10.1115/1.4064260

BibTeX
@article{Sandri2024,
  author = {Sandri, Umberto and Sridhara, Shreyas Ramanagar and Andreini, Antonio and Bohon, Myles D. and Picchi, A. and Facchini, B.},
  title = {Evaluation of Cooling Requirements for Rotating Detonation Combustors},
  journal = {Journal of Turbomachinery},
  year = {2024},
  volume = {146},
  number = {5},
  doi = {10.1115/1.4064260}
}
Kostenlos starten →