EUVIMEDEUVIMED entdecken
Crossref

Quantification of Heat Loads in Rotating Detonation Combustors for Gas Turbines

Shreyas Ramanagar Sridhara, Umberto Sandri, Pier Carlo Nassini, Antonio Andreini, Marc D. Polanka, Myles D. Bohon

Journal of Propulsion and Power · 2026-01 · 42 (1) · 149-159

DOI: 10.2514/1.b39899 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Propulsion and Power, 2026-01. Verfasst von Shreyas Ramanagar Sridhara und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: European Union’s Horizon 2020 research and innovation program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Among the many challenges to integrating a rotating detonation combustor (RDC) into a gas turbine (GT), cooling is one of the most predominant due to the high heat loads generated by the combustion process. To design a cooling system for an RDC that allows for its sustainable operation, a quantification of the heat loads of an RDC operating at conditions representative of GT is necessary. The presence of a detonation wave interacting with the boundary layer and a small annulus width leads to higher heat transfer when compared to a conventional GT combustor. This paper numerically models the heat flux and heat transfer coefficient of an RDC that would be relevant for setting cooling requirements in practical systems. Integral boundary-layer methods are employed to build a tool that uses 2D distributions of integral quantities to obtain the heat flux. A global heat transfer model is built using these simulations as a reference. The model was used to show that the heat transfer in the RDC is enhanced by the presence of a blockage at the combustor outlet. The effects on the flowfield are associated with an increase in chamber pressure and detonation strength, both causing an increase in the heat transfer coefficient to the liner walls.

Förderung

  • European Union’s Horizon 2020 research and innovation program

Zitieren

APA

Sridhara, S. R., Sandri, U., Nassini, P. C., Andreini, A., Polanka, M. D., & Bohon, M. D. (2026). Quantification of Heat Loads in Rotating Detonation Combustors for Gas Turbines. Journal of Propulsion and Power, 42(1), 149-159. https://doi.org/10.2514/1.b39899

Vancouver

Sridhara SR, Sandri U, Nassini PC, Andreini A, Polanka MD, Bohon MD. Quantification of Heat Loads in Rotating Detonation Combustors for Gas Turbines. Journal of Propulsion and Power. 2026;42(1):149-159. doi:10.2514/1.b39899

BibTeX
@article{Sridhara2026,
  author = {Sridhara, Shreyas Ramanagar and Sandri, Umberto and Nassini, Pier Carlo and Andreini, Antonio and Polanka, Marc D. and Bohon, Myles D.},
  title = {Quantification of Heat Loads in Rotating Detonation Combustors for Gas Turbines},
  journal = {Journal of Propulsion and Power},
  year = {2026},
  volume = {42},
  number = {1},
  pages = {149--159},
  doi = {10.2514/1.b39899}
}
Kostenlos starten →