EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reduced-parameter damage detection in cantilever beams using magnetoelastically measured bending frequencies

Georgios Samourgkanidis

Frontiers in Built Environment · 30.09.2026 · 12

DOI: 10.3389/fbuil.2026.1978290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Built Environment, online erschienen am 30.09.2026. Verfasst von Georgios Samourgkanidis. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an approximately material-invariant framework for vibration-based damage detection in cracked cantilever beams using normalized modal frequencies and magnetoelastic vibration sensing. A finite element formulation combined with fracture mechanics theory was developed to model stiffness degradation caused by transverse cracks and implemented in MATLAB to evaluate the first eight bending modes under varying crack locations, crack depths, and material properties. The influence of Young’s modulus, mass density, and Poisson’s ratio on both the natural frequencies (NFs) and normalized frequency ratios (NFRs) was systematically investigated. The results demonstrate that the absolute natural frequencies are strongly governed by stiffness and inertia effects, whereas the normalization procedure substantially suppresses the dominant dependence on Young’s modulus and mass density, yielding NFRs that remain nearly invariant across different engineering materials. In contrast, Poisson’s ratio retains a weaker but systematic influence on the normalized response. Experimental validation was performed using Al 6063, Al 7075, and AISI 1018 cantilever beams instrumented with magnetoelastic sensors for contactless signal detection of modal frequencies. Excellent agreement was obtained between the numerical and experimental results, with deviations below approximately 1.5% for the natural frequencies and below 0.5% for the averaged NFRs. The findings confirm that the proposed normalization framework preserves sensitivity to structural damage while significantly reducing material-dependent scaling effects. In addition, the study demonstrates the effectiveness of magnetoelastic sensing as a contactless signal detection technique for vibration-based structural health monitoring applications.

Zitieren

APA

Samourgkanidis, G. (2026). Reduced-parameter damage detection in cantilever beams using magnetoelastically measured bending frequencies. Frontiers in Built Environment, 12. https://doi.org/10.3389/fbuil.2026.1978290

Vancouver

Samourgkanidis G. Reduced-parameter damage detection in cantilever beams using magnetoelastically measured bending frequencies. Frontiers in Built Environment. 2026;12. doi:10.3389/fbuil.2026.1978290

BibTeX
@article{Samourgkanidis2026,
  author = {Samourgkanidis, Georgios},
  title = {Reduced-parameter damage detection in cantilever beams using magnetoelastically measured bending frequencies},
  journal = {Frontiers in Built Environment},
  year = {2026},
  volume = {12},
  doi = {10.3389/fbuil.2026.1978290}
}
Kostenlos starten →