EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermomechanical Behavior of Ni-Ti Shape Memory Alloy Cantilever Beams Under Cyclic Bending

Saeed Danaee Barforooshi, Girolamo Costanza, Stefano Paoloni, Ilaria Porroni, Maria Elisa Tata

Processes · 15.03.2026 · 14 (6) · 931

DOI: 10.3390/pr14060931 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 15.03.2026. Verfasst von Saeed Danaee Barforooshi und 4 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

NiTi Shape Memory Alloys (SMAs) display notable thermomechanical properties such as superelasticity and the elastocaloric effect, which makes them of interest for emerging solid-state cooling and thermal management applications. It is recognized that a considerable amount of work has been recently conducted to improve the understanding of the uniaxial tensile and compressive response of Ni-Ti SMAs; however, there has been limited work on the response to bending, which is an important operational mode in the practical designs of devices. This work consists of an experimental study of the thermomechanical response of Ni-Ti cantilever beams to cyclic bending. Nitinol samples (100 mm × 20 mm × 1 mm) were shape-set at 550 °C for 30 min and tested at 1800 rpm. The sample surface temperature change was monitored with infrared thermography data and analyzed with the Profile Mono Segment and Area Rectangle methods. The findings show that there was a measurable elastocaloric temperature change of approximately 4–5 °C, and temperature change increased by 21–25% as bending deflection increased from 31 mm to 33 mm. This was further shown to be nonlinear with the applied strain amplitude, reinforcing the strong coupling between mechanical and thermal response. The results demonstrate that Ni-Ti cantilever beams have significant potential for compact, sustainable solid-state cooling and energy storage applications, with thermal energy transfer strongly dependent on strain and energy transfer optimization.

Zitieren

APA

Barforooshi, S. D., Costanza, G., Paoloni, S., Porroni, I., & Tata, M. E. (2026). Thermomechanical Behavior of Ni-Ti Shape Memory Alloy Cantilever Beams Under Cyclic Bending. Processes, 14(6), 931. https://doi.org/10.3390/pr14060931

Vancouver

Barforooshi SD, Costanza G, Paoloni S, Porroni I, Tata ME. Thermomechanical Behavior of Ni-Ti Shape Memory Alloy Cantilever Beams Under Cyclic Bending. Processes. 2026;14(6):931. doi:10.3390/pr14060931

BibTeX
@article{Barforooshi2026,
  author = {Barforooshi, Saeed Danaee and Costanza, Girolamo and Paoloni, Stefano and Porroni, Ilaria and Tata, Maria Elisa},
  title = {Thermomechanical Behavior of Ni-Ti Shape Memory Alloy Cantilever Beams Under Cyclic Bending},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {931},
  doi = {10.3390/pr14060931}
}
Kostenlos starten →