EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

SURFACE MODIFICATION OF ALUMINA-SILICA BY ADDITIVE AGENT USING SOL-GEL METHOD AS FILLER DENTAL COMPOSITE

Yanwar Faza, Veni Takarini, Renny Febrida, Elin Karlina

B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah · 02.01.2024 · 10 (2) · 176-181

DOI: 10.33854/jbd.v10i2.1506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah, online erschienen am 02.01.2024. Verfasst von Yanwar Faza und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Macro-sized and inhomogeneous distribution of ceramic filer particles make it difficult to obtain smooth surfaces of dental composite after polishing.

Objective

This study aims to synthesize alumina silica (Al2O3-SiO2) fillers using sol gel method with the additives agent chitosan 5%, 10% and polyethylene glycol (PEG) 5% to produce micro particle size and evenly distributed particle as filler dental composite.

Methods

The type of research is descriptive explorative. The sol-gel process was utilized to synthesize filler particles of Al2O3-SiO2. TEOS was dissolved in ethanol and mixed with acetic acid as catalyts. Al2(NO3)3 was added into the solution and mixed homogenously. Subsequently, the additive agents (Chitosan 5%, chitosan 10% and PEG) were mixed into the mixture for 30 minutes. Drying the samples for 48 hours at 60°C in the oven. The Dynamic light scattering (DLS) SZ-1 was used to evaluate the size, particle distribution and zeta potential.

Result

The results showed that the addition of chitosan 10% produced a smaller size of Al2O3-SiO2 compared to other samples. A homogeneous particle distribution is shown in the sample with PEG 5%. Meanwhile, zeta potential values of the filler particles Al2O3-SiO2 with the addition of chitosan 10% shows the biggest value.

Conclusion

The additive agent of chitosan 10% can modify the surface of filler Al2O3-SiO2 in order to inhibit particle growth more effectively but better particle distribution is shown in samples with PEG 5% due to the lower viscosity than chitosan thus it is easily homogenized in the solution

Zitieren

APA

Faza, Y., Takarini, V., Febrida, R., & Karlina, E. (2024). SURFACE MODIFICATION OF ALUMINA-SILICA BY ADDITIVE AGENT USING SOL-GEL METHOD AS FILLER DENTAL COMPOSITE. B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah, 10(2), 176-181. https://doi.org/10.33854/jbd.v10i2.1506

Vancouver

Faza Y, Takarini V, Febrida R, Karlina E. SURFACE MODIFICATION OF ALUMINA-SILICA BY ADDITIVE AGENT USING SOL-GEL METHOD AS FILLER DENTAL COMPOSITE. B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah. 2024;10(2):176-181. doi:10.33854/jbd.v10i2.1506

BibTeX
@article{Faza2024,
  author = {Faza, Yanwar and Takarini, Veni and Febrida, Renny and Karlina, Elin},
  title = {SURFACE MODIFICATION OF ALUMINA-SILICA BY ADDITIVE AGENT USING SOL-GEL METHOD AS FILLER DENTAL COMPOSITE},
  journal = {B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {176--181},
  doi = {10.33854/jbd.v10i2.1506}
}
Kostenlos starten →