EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Epoxy Composites Reinforced with Sol–Gel Synthesized Alumina–Silica, Alumina, and Natural Silica Fillers: Comparative Mechanical Performance

Milica Marković, Marija M Vuksanović iD, Miloš Petrović iD, Željko Radovanović iD, Radmila Jančić Heinemann iD, Vera Obradović

Gels · 08.05.2026 · 12 (5) · 408

DOI: 10.3390/gels12050408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 08.05.2026. Verfasst von Milica Marković und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development, MINISTRY OF SCIENCE, TECHNOLOGICAL DEVELOPMENT, AND INNOVATION OF THE REPUBLIC OF SERBIA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Epoxy resins are widely used thermosetting polymers, but their limited toughness and flexural resilience restrict broader applications. In this study, diglycidyl ether of bisphenol A (DGEBA) epoxy was reinforced with 5 wt.% ceramic fillers of different origins: sol–gel alumina calcined at 550 °C (γ-Al2O3) and 1000 °C (α-Al2O3), silica derived from rice husk, silica from diatomaceous earth, and a hybrid alumina–silica mixture prepared by sol–gel and calcined at 1000 °C. Fillers were structurally characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field-emission scanning electron microscopy (FESEM). Mechanical properties were evaluated through tensile (ASTM D638) and flexural (ASTM D790) testing. All reinforcements enhanced the performance of neat epoxy. γ-Al2O3 provided superior tensile reinforcement compared to α-Al2O3, underscoring the importance of particle morphology and surface reactivity. The hybrid alumina–silica filler achieved the highest flexural strength of 50.6 MPa, compared to 9.91 MPa for the neat epoxy. Bio-derived silica showed improved flexural properties, although its tensile reinforcement was less pronounced compared to the sol–gel derived fillers. These results establish clear structure–property relationships and confirm that filler phase, morphology, and calcination temperature critically govern the mechanical performance of epoxy composites.

Schlagwörter

Stichwörter der Autor:innen

diatomaceous earth silicaepoxy compositesflexural strengthhybrid alumina–silica fillersmechanical propertiesrice husk silicasol–gel aluminatensile strength

Autor:innen und Institutionen

  • Faculty of Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia.
  • Department of Chemical Dynamics and Permanent Education, VINČA Institute of Nuclear Sciences-National Institute of the Republic of Serbia, University of Belgrade, 11351 Belgrade, Serbia.
  • Innovation Center of Faculty of Technology and Metallurgy in Belgrade, 4 Karnegijeva Street, 11120 Belgrade, Serbia.

ORCID-Profile: Marija M Vuksanović, Miloš Petrović, Željko Radovanović, Radmila Jančić Heinemann

Förderung

  • Ministry of Education, Science and Technological Development
  • MINISTRY OF SCIENCE, TECHNOLOGICAL DEVELOPMENT, AND INNOVATION OF THE REPUBLIC OF SERBIA

Zitieren

APA

Marković, M., Vuksanović, M. M., Petrović, M., Radovanović, Ž., Heinemann, R. J., & Obradović, V. (2026). Epoxy Composites Reinforced with Sol–Gel Synthesized Alumina–Silica, Alumina, and Natural Silica Fillers: Comparative Mechanical Performance. Gels, 12(5), 408. https://doi.org/10.3390/gels12050408

Vancouver

Marković M, Vuksanović MM, Petrović M, Radovanović Ž, Heinemann RJ, Obradović V. Epoxy Composites Reinforced with Sol–Gel Synthesized Alumina–Silica, Alumina, and Natural Silica Fillers: Comparative Mechanical Performance. Gels. 2026;12(5):408. doi:10.3390/gels12050408

BibTeX
@article{Markovi2026,
  author = {Marković, Milica and Vuksanović, Marija M and Petrović, Miloš and Radovanović, Željko and Heinemann, Radmila Jančić and Obradović, Vera},
  title = {Epoxy Composites Reinforced with Sol–Gel Synthesized Alumina–Silica, Alumina, and Natural Silica Fillers: Comparative Mechanical Performance},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {5},
  pages = {408},
  doi = {10.3390/gels12050408}
}
Kostenlos starten →