Peningkatan Keakurasian Produk Cetak 3D Printing Menggunakan Filamen PLA+
Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 484-493
DOI: 10.33504/jitt.v4i2.370 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Andimeri Andimeri und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This study aims to improve the dimensional accuracy of printed products in the 3D Printing process using the Fused Deposition Modeling (FDM) method with PLA+ filament material. The research employed the Taguchi L9 (3²) experimental design to evaluate the influence of printing speed and layer height on the dimensional precision of the printed objects. Cube-shaped specimens measuring 20×20 mm were fabricated using an Ender 3 Pro printer and measured with a digital caliper of 0.02 mm accuracy. The results showed that the combination of a 0.10 mm layer height and 85 mm/s print speed produced the highest accuracy, with a minimal dimensional deviation of approximately ±0.05 mm from the nominal size. The Signal-to-Noise (S/N) Ratio analysis indicated that both parameters contributed equally to print quality. Therefore, optimizing printing parameters and utilizing PLA+ material effectively enhances dimensional precision, process stability, and geometric quality of 3D printed products. These findings can serve as a practical guideline for optimizing additive manufacturing processes based on the FDM technique.
Zitieren
APA
Andimeri, A., Yunus, M., & Pristiansyah, P. (2026). Peningkatan Keakurasian Produk Cetak 3D Printing Menggunakan Filamen PLA+. Jurnal Inovasi Teknologi Terapan, 4(2), 484-493. https://doi.org/10.33504/jitt.v4i2.370
Vancouver
Andimeri A, Yunus M, Pristiansyah P. Peningkatan Keakurasian Produk Cetak 3D Printing Menggunakan Filamen PLA+. Jurnal Inovasi Teknologi Terapan. 2026;4(2):484-493. doi:10.33504/jitt.v4i2.370
BibTeX
@article{Andimeri2026,
author = {Andimeri, Andimeri and Yunus, Muhammad and Pristiansyah, Pristiansyah},
title = {Peningkatan Keakurasian Produk Cetak 3D Printing Menggunakan Filamen PLA+},
journal = {Jurnal Inovasi Teknologi Terapan},
year = {2026},
volume = {4},
number = {2},
pages = {484--493},
doi = {10.33504/jitt.v4i2.370}
}
EUVIMED