EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Comparison of Stress and Deformation Distribution in Steel and Cobalt Chromium Materials for Femoral Bone Implants using Computational Biomechanics Analysis

Hamizatul Hardiantati, Widya Rachma Wulan, Fajar Timur, Nailul Hasan, Nur Aini Fauziyah

FARADAY · 2025

DOI: 10.33005/faraday.v1i1.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift FARADAY, 2025. Verfasst von Hamizatul Hardiantati und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study analyzes the mechanical performance of femoral bone implants using two types of materials, namely Alloys and Cobalt Chromium Alloys, as well as two variations in implant length (72 mm and 24 mm, and 80 mm and 20 mm). Simulation was conducted using the Finite Element Method (FEM) to evaluate mechanical parameters, such as directional deformation, equivalent stress, maximum principal stress, and minimum principal elastic strain. The analysis results show that the Cobalt Chromium Alloys material has smaller deformation compared to the Alloys, indicating better stiffness and load-bearing capacity. However, the maximum principal stress value is higher in Cobalt Chromium Alloys, indicating a greater risk of stress concentration. Meanwhile, a longer implant length shows a more even stress distribution compared to a shorter length. This study provides important insights into the influence of material and implant length on its mechanical performance, and can serve as a basis for designing optimal implants for specific medical needs

Zitieren

APA

Hardiantati, H., Wulan, W. R., Timur, F., Hasan, N., & Fauziyah, N. A. (2025). Comparison of Stress and Deformation Distribution in Steel and Cobalt Chromium Materials for Femoral Bone Implants using Computational Biomechanics Analysis. FARADAY. https://doi.org/10.33005/faraday.v1i1.3

Vancouver

Hardiantati H, Wulan WR, Timur F, Hasan N, Fauziyah NA. Comparison of Stress and Deformation Distribution in Steel and Cobalt Chromium Materials for Femoral Bone Implants using Computational Biomechanics Analysis. FARADAY. 2025. doi:10.33005/faraday.v1i1.3

BibTeX
@article{Hardiantati2025,
  author = {Hardiantati, Hamizatul and Wulan, Widya Rachma and Timur, Fajar and Hasan, Nailul and Fauziyah, Nur Aini},
  title = {Comparison of Stress and Deformation Distribution in Steel and Cobalt Chromium Materials for Femoral Bone Implants using Computational Biomechanics Analysis},
  journal = {FARADAY},
  year = {2025},
  doi = {10.33005/faraday.v1i1.3}
}
Kostenlos starten →