Influence of bone quality on femoral stress distribution after cemented stem insertion: an experimental thermoelastic stress analysis
HIP International · 2026-07 · 36 (4) · 541-549
DOI: 10.1177/11207000261420734 ↗Kurz gefasst
Fachartikel in der Zeitschrift HIP International, online erschienen am 18.03.2026. Verfasst von Shota Yasunaga und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Institute of Medicine, University of Tsukuba, Ibaraki, Japan. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Hip, Hip Prosthesis, Osteoporosis, Femur. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Purpose
With an ageing population, the number of total hip arthroplasty (THA) performed in osteoporotic patients is increasing. Cemented stems are often chosen for osteoporotic bone owing to their lower fracture risk. However, how bone quality influences stress distribution after cemented stem insertion remains unclear. This study compared femoral stress distribution between normal and osteoporotic femora using thermoelastic stress analysis (TSA). Materials and methods: 6 composite femora were used: 3 normal adult male models (#3403) and 3 osteoporotic models (#3503). C-stem AMT cemented stems were implanted with a standardised technique. TSA was conducted before and after stem insertion under physiological loading (normal: 100–1900 N; osteoporotic: 100–1000 N). Stress distribution was analysed by Gruen zones and compared using linear mixed models.
Results
In the normal models, stress uniformly decreased after stem insertion with a distal shift of peak stress. In the osteoporotic models, proximal stress decreased markedly, while distal stress (zones 4L, 4M) increased, demonstrating a more pronounced distal shift.
Conclusions
Bone quality strongly affects load transfer after cemented stem insertion. Osteoporotic bone demonstrated proximal stress loss and distal concentration, possibly underlying atypical periprosthetic femoral fractures. TSA provides useful insights for implant design and surgical planning in osteoporotic THA.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Orthopaedic Surgery, Institute of Medicine, University of Tsukuba, Ibaraki, Japan.
- Core Manufacturing Technology Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, Japan.
ORCID-Profile: Shota Yasunaga, Ryunosuke Watanabe, Koshiro Shimasaki
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Yasunaga, S., Watanabe, R., Nishino, T., Yoshizawa, T., Hirose, F., Shimasaki, K., Mishima, H., & Harada, Y. (2026). Influence of bone quality on femoral stress distribution after cemented stem insertion: an experimental thermoelastic stress analysis. HIP International, 36(4), 541-549. https://doi.org/10.1177/11207000261420734
Vancouver
Yasunaga S, Watanabe R, Nishino T, Yoshizawa T, Hirose F, Shimasaki K, et al. Influence of bone quality on femoral stress distribution after cemented stem insertion: an experimental thermoelastic stress analysis. HIP International. 2026;36(4):541-549. doi:10.1177/11207000261420734
BibTeX
@article{Yasunaga2026,
author = {Yasunaga, Shota and Watanabe, Ryunosuke and Nishino, Tomofumi and Yoshizawa, Tomohiro and Hirose, Fumi and Shimasaki, Koshiro and Mishima, Hajime and Harada, Yoshihisa},
title = {Influence of bone quality on femoral stress distribution after cemented stem insertion: an experimental thermoelastic stress analysis},
journal = {HIP International},
year = {2026},
volume = {36},
number = {4},
pages = {541--549},
doi = {10.1177/11207000261420734}
}
EUVIMED