EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational Shape Design Optimization of Femoral Implants: Towards Efficient Forging Manufacturing

Víctor Tuninetti, Geovanni Fuentes, Angelo Oñate, Sunny Narayan, Diego Celentano, Claudio García-Herrera, Brahim Menacer, Gonzalo Pincheira, César Garrido, Rodrigo Valle

Applied Sciences · 14.09.2024 · 14 (18) · 8289

DOI: 10.3390/app14188289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 14.09.2024. Verfasst von Víctor Tuninetti und 9 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Total hip replacement is one of the most successful orthopedic operations in modern times. Osteolysis of the femur bone results in implant loosening and failure due to improper loading. To reduce induced stress, enhance load transfer, and minimize stress, the use of Ti-6Al-4V alloy in bone implants was investigated. The objective of this study was to perform a three-dimensional finite element analysis (FEA) of the femoral stem to optimize its shape and analyze the developed deformations and stresses under operational loads. In addition, the challenges associated with the manufacturing optimization of the femoral stem using large strain-based finite element modeling were addressed. The numerical findings showed that the optimized femoral stem using Ti-6Al-4V alloy under the normal daily activities of a person presented a strains distribution that promote uniform load transfer from the proximal to the distal area, and provided a mass reduction of 26%. The stress distribution was found to range from 700 to 0.2 MPa in the critical neck area of the implant. The developed computational tool allows for improved customized designs that lower the risk of prosthesis loss due to stress shielding.

Zitieren

APA

Tuninetti, V., Fuentes, G., Oñate, A., Narayan, S., Celentano, D., García-Herrera, C., Menacer, B., Pincheira, G., Garrido, C., & Valle, R. (2024). Computational Shape Design Optimization of Femoral Implants: Towards Efficient Forging Manufacturing. Applied Sciences, 14(18), 8289. https://doi.org/10.3390/app14188289

Vancouver

Tuninetti V, Fuentes G, Oñate A, Narayan S, Celentano D, García-Herrera C, et al. Computational Shape Design Optimization of Femoral Implants: Towards Efficient Forging Manufacturing. Applied Sciences. 2024;14(18):8289. doi:10.3390/app14188289

BibTeX
@article{Tuninetti2024,
  author = {Tuninetti, Víctor and Fuentes, Geovanni and Oñate, Angelo and Narayan, Sunny and Celentano, Diego and García-Herrera, Claudio and Menacer, Brahim and Pincheira, Gonzalo and Garrido, César and Valle, Rodrigo},
  title = {Computational Shape Design Optimization of Femoral Implants: Towards Efficient Forging Manufacturing},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {18},
  pages = {8289},
  doi = {10.3390/app14188289}
}
Kostenlos starten →