A new method for monitoring the product surface temperature and its application in the deposition of vacuum-arc coatings
Aerospace Technic and Technology · 22.04.2026 · (2) · 32-44
DOI: 10.32620/aktt.2026.2.04 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace Technic and Technology, online erschienen am 22.04.2026. Verfasst von Iurii Sysoiev und 4 weiteren Autor:innen.
Abstract (Originalsprache)
The subject matter of this study is the process of measuring the product surface temperature using a pyrometric method during the deposition of vacuum-arc coatings, as well as the application of the obtained results to control the coating deposition process. The aim of this work is to improve the stability, accuracy, and reproducibility of product surface temperature measurements for effective control of the coating deposition process. The objectives of the study are to develop an algorithm for monitoring the product surface temperature during coating deposition and to determine the design conditions for planetary gear trains that ensure the product positioning exactly at the temperature measurement point after each full revolution. The methods used in this research include analytical approaches and design methods for planetary gear trains that satisfy the specified requirements. The following results were obtained. Based on an analysis of existing methods for measuring the product surface temperature during coating deposition, the main disadvantages of each method were identified. The pyrometric method was determined to be the most suitable, as it allows accurate measurement of the product surface temperature once the contamination of the pyrometer's input window is resolved. An operational algorithm for the proposed pyrometric temperature measurement system for monitoring the product surface temperature was developed. The application of this algorithm during the deposition of vacuum-arc coatings at various processing stages improves coating quality. When implemented, the algorithm ensures the stability, accuracy, and reproducibility of temperature measurement results by protecting the pyrometer optics from condensation of cathode erosion products. This is achieved by switching off the plasma source, stopping the rotation of the products in the vacuum chamber, and performing the temperature measurement after a delay following the plasma source's shutdown. The temperature measurement process is carried out at each stage of vacuum-arc coating deposition, including ion cleaning and coating deposition. Temperature monitoring allows timely completion of the ion cleaning process without tempering the product material. During the coating deposition stage, it enables maintaining the product temperature at a specified level by adjusting the applied voltage. These measures help achieve high-quality coatings. Conditions were developed that make it possible to obtain a simple planetary gear train (-type) in which the planets perform an integer number of revolutions per one revolution of the carrier. A sequence for the optimal kinematic and geometric synthesis of such mechanisms was also developed for their subsequent application in technological processes of vacuum-arc coating deposition. An example of the calculation of such a planetary gear train for the “Bulat-6” installation is presented. Conclusions. The scientific novelty of the results obtained is as follows: an algorithm for monitoring the surface temperature of workpieces during coating deposition has been developed within the proposed temperature measurement system, which incorporates a specially designed planetary gear train. This ensures precise positioning of the workpiece at the temperature measurement point and enables control of the vacuum-arc coating process based on temperature monitoring results, thereby contributing to the improvement of the quality of the resulting coatings.
Zitieren
APA
Sysoiev, I., Kladova, O., Kovalov, M., Fesenko, Y., & Shyrokyi, Y. (2026). A new method for monitoring the product surface temperature and its application in the deposition of vacuum-arc coatings. Aerospace Technic and Technology, 32-44. https://doi.org/10.32620/aktt.2026.2.04
Vancouver
Sysoiev I, Kladova O, Kovalov M, Fesenko Y, Shyrokyi Y. A new method for monitoring the product surface temperature and its application in the deposition of vacuum-arc coatings. Aerospace Technic and Technology. 2026:32-44. doi:10.32620/aktt.2026.2.04
BibTeX
@article{Sysoiev2026,
author = {Sysoiev, Iurii and Kladova, Olha and Kovalov, Mykyta and Fesenko, Yevhen and Shyrokyi, Yurii},
title = {A new method for monitoring the product surface temperature and its application in the deposition of vacuum-arc coatings},
journal = {Aerospace Technic and Technology},
year = {2026},
number = {2},
pages = {32--44},
doi = {10.32620/aktt.2026.2.04}
}
EUVIMED