Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method
Coatings · 03.02.2023 · 13 (2) · 351
DOI: 10.3390/coatings13020351 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 03.02.2023. Verfasst von Andrey A. Leonov und 6 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.
Abstract (Originalsprache)
The paper presents the study results of CrN/TiN multi-layer coatings, as well as single-layer TiN and CrN coatings on Cr12MoV cold work die steel deposited by the vacuum-arc plasma-assisted method. Three CrN/TiN coatings of 8-, 16-, and 32-layers were deposited, in which the thickness of each layer was 500 nm, 250 nm and 125 nm, respectively. All of the coatings reveal a face-centered cubic structure with highly oriented (111) growth. The hardness of the CrN/TiN multi-layer coatings was about 27 GPa. Changing the architecture of CrN/TiN multi-layer coatings by reducing the thickness of the CrN and TiN layers from 500 nm to 125 nm promotes a smooth decrease in both the wear parameter and the coefficient of friction. By using an X-ray phase analysis with synchrotron radiation, it was found that 32-layer CrN/TiN coating retained thermal stability during heating in air to a temperature of 1120–1125 °C, and in a vacuum at least to a temperature of 1200 °C.
Förderung
- Ministry of Science and Higher Education of the Russian Federation
Zitieren
APA
Leonov, A. A., Denisova, Y. A., Denisov, V. V., Syrtanov, M. S., Shmakov, A. N., Savostikov, V. M., & Teresov, A. D. (2023). Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method. Coatings, 13(2), 351. https://doi.org/10.3390/coatings13020351
Vancouver
Leonov AA, Denisova YA, Denisov VV, Syrtanov MS, Shmakov AN, Savostikov VM, et al. Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method. Coatings. 2023;13(2):351. doi:10.3390/coatings13020351
BibTeX
@article{Leonov2023,
author = {Leonov, Andrey A. and Denisova, Yuliya A. and Denisov, Vladimir V. and Syrtanov, Maxim S. and Shmakov, Alexander N. and Savostikov, Viktor M. and Teresov, Anton D.},
title = {Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method},
journal = {Coatings},
year = {2023},
volume = {13},
number = {2},
pages = {351},
doi = {10.3390/coatings13020351}
}
EUVIMED