EUVIMEDEUVIMED entdecken
Crossref

Wear performance of Ti-based alloy coatings on 316L SS fabricated with the sputtering method: Relevance to biomedical implants

Shunmuga Priyan Murugan, Godwin George, Julyes Jaisingh

Bio-Medical Materials and Engineering · 2024

DOI: 10.3233/bme-230127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bio-Medical Materials and Engineering, 2024. Verfasst von Shunmuga Priyan Murugan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Loyola Institute of Technology and Science, Thovalai, Tamil Nadu, India. Hauptthemen laut MEDLINE: Titanium, Coated Materials, Biocompatible, Surface Properties, Materials Testing. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: This investigation was conducted to encapsulate 316L SS with a Ti-based alloy coating. OBJECTIVE: The aim was to fabricate a coating using TiN, TiO2, and TiCoCr powders on 316L SS through the physical vapor deposition (PVD) sputtering process. METHODS: The powders were consecutively coated on 316L SS through the PVD sputtering process with coating durations of 30, 60, and 90 min. Further microhardness, surface roughness, microabrasion, and adhesion strength tests were also carried out. RESULTS: A 60% improvement in abrasion resistance was observed in TiCoCr-coated samples compared to the uncoated substrate. The X-ray diffraction results confirmed the optimal formation of Ti alloy coatings with corresponding orientation over the SS substrates. Moreover, TiCoCr with a 90 min coating duration had much better surface characteristics than TiO2 and TiN. CONCLUSION: The 90 min coating duration should be optimal for coating in steel for bio-implants.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumCoated Materials, BiocompatibleSurface PropertiesMaterials TestingAlloysProstheses and ImplantsStainless SteelHardnessPowdersX-Ray Diffraction

Stichwörter der Autor:innen

Roughnessadhesionmicro-abrasionmicrohardness

Substanzen

TitaniumCoated Materials, BiocompatibleAlloysStainless SteelPowderstitanium dioxidetitanium nitride

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Loyola Institute of Technology and Science, Thovalai, Tamil Nadu, India.

Zitieren

APA

Murugan, S. P., George, G., & Jaisingh, J. (2024). Wear performance of Ti-based alloy coatings on 316L SS fabricated with the sputtering method: Relevance to biomedical implants. Bio-Medical Materials and Engineering. https://doi.org/10.3233/bme-230127

Vancouver

Murugan SP, George G, Jaisingh J. Wear performance of Ti-based alloy coatings on 316L SS fabricated with the sputtering method: Relevance to biomedical implants. Bio-Medical Materials and Engineering. 2024. doi:10.3233/bme-230127

BibTeX
@article{Murugan2024,
  author = {Murugan, Shunmuga Priyan and George, Godwin and Jaisingh, Julyes},
  title = {Wear performance of Ti-based alloy coatings on 316L SS fabricated with the sputtering method: Relevance to biomedical implants},
  journal = {Bio-Medical Materials and Engineering},
  year = {2024},
  doi = {10.3233/bme-230127}
}
Kostenlos starten →