A Novel Radially Graded Hydroxyapatite‐Based Composite for Bioactive Implant Interfaces
Journal of Biomedical Materials Research Part A · 2025
DOI: 10.1002/jbm.a.38007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, 2025. Verfasst von Zeliha Coskun Tas und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology, Biomedical Engineering Department, Kocaeli University, Kocaeli, Turkey. Hauptthemen laut MEDLINE: Durapatite, Titanium, Biocompatible Materials, Prostheses and Implants. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Scientific Research Project Unit of Kocaeli University, The Scientific and Technological Research Council of Türkiye (TUBITAK), Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.
Abstract (Originalsprache)
The combination of superior mechanical properties, corrosion resistance, and biological characteristics makes Ti‐6Al‐4V a widely used biomaterial. However, its clinical application as an orthopedic implant is limited by its hardness and weak osseointegration capacity. This study focuses on the development of a functionally graded biomaterial that has increased bioactivity and decreased mechanical mismatch with living tissue. In this scope, a novel radially functionally graded Ti‐5Mo/hydroxyapatite (HA) biocomposite was successfully fabricated via pressure‐assisted sintering using a specially designed mold that enabled directional HA enrichment toward the outer surface. This architectural design addresses the persistent challenge of combining mechanical reliability with biological functionality in load‐bearing implants. Comprehensive characterization was performed, including x‐ray diffraction (XRD), Rietveld refinement, optical and scanning electron microscopy (SEM/EDX), atomic force microscopy (AFM), contact angle measurements, and in vitro cytotoxicity assays using L929 fibroblast cells. Mechanical behavior was assessed through Brazilian splitting, three‐point bending, microhardness, and tribological testing under both dry and corrosive conditions. The biocomposite exhibited a dual‐phase α + β titanium matrix and HA‐derived oxides in the surface layers, with a graded increase in porosity and hardness from the core to the periphery. Mechanical tests revealed a bending modulus of 22.4 GPa, close to that of cortical bone, while the surface showed enhanced roughness, hydrophilicity (contact angle 35.3°), and corrosion resistance. In vitro results confirmed the material's biocompatibility and superior cell viability in HA‐rich regions. These findings demonstrate that the developed Ti‐5Mo/HA FGM offers a structurally and biologically optimized solution for orthopedic and dental implant applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Faculty of Technology, Biomedical Engineering Department, Kocaeli University, Kocaeli, Turkey.
- Faculty of Engineering, Metallurgical and Materials Engineering Department, Kocaeli University, Kocaeli, Turkey.
- Experimental Techniques Centre, Brunel University London, London, UK.
ORCID-Profile: Zeliha Coskun Tas
Förderung
- Scientific Research Project Unit of Kocaeli University
- The Scientific and Technological Research Council of Türkiye (TUBITAK)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
Zitieren
APA
Coskun Tas, Z., Celik, T., Mutlu, I., Yamanoglu, R., & Anguilano, L. (2025). A Novel Radially Graded Hydroxyapatite‐Based Composite for Bioactive Implant Interfaces. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.38007
Vancouver
Coskun Tas Z, Celik T, Mutlu I, Yamanoglu R, Anguilano L. A Novel Radially Graded Hydroxyapatite‐Based Composite for Bioactive Implant Interfaces. Journal of Biomedical Materials Research Part A. 2025. doi:10.1002/jbm.a.38007
BibTeX
@article{CoskunTas2025,
author = {Coskun Tas, Zeliha and Celik, Talip and Mutlu, Ibrahim and Yamanoglu, Ridvan and Anguilano, Lorna},
title = {A Novel Radially Graded Hydroxyapatite‐Based Composite for Bioactive Implant Interfaces},
journal = {Journal of Biomedical Materials Research Part A},
year = {2025},
doi = {10.1002/jbm.a.38007}
}
EUVIMED