EUVIMEDEUVIMED entdecken
Crossref

Designing and clinical application of a 3D-printed personalized model of a radiofrequency needle guide with a maxillary fixator for puncture of the gasserian ganglion for trigeminal neuralgia treatment

Albert A Sufianov, Nargiza A Garifullina, Aleksandr N Zyryanov, Andrey G Shapkin, Luis A B Borba, Matias Baldoncini, Rinat A Sufianov

Journal of Neurosurgery · 2025

DOI: 10.3171/2024.8.jns24196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Neurosurgery, 2025. Verfasst von Albert A Sufianov und 6 weiteren Autor:innen. Beteiligte Einrichtung: 1Department of Neurosurgery, I.M. Sechenov First Moscow State Medical University (Sechenov University), Moscow, Russian Federation. Hauptthemen laut MEDLINE: Trigeminal Neuralgia, Printing, Three-Dimensional, Trigeminal Ganglion. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

OBJECTIVE The purpose of this study was to present a newly designed 3D-printed personalized model (3D PPM) of a radiofrequency needle guide with a maxillary fixation for gasserian ganglion (GG) puncture. METHODS Implementation of 3D CT–guided radiofrequency therapy of the GG with and without use of 3D PPM was analyzed. The following parameters were assessed: radiation time, dose area product, air kerma reference point, pain severity during the puncture needle insertion, prosopalgia regression degree (according to visual analog scale) and the severity of facial numbness (according to the Barrow Neurological Institute scale) in the early postoperative period, and postpuncture complications. RESULTS Pain severity reduction was equivalent in both groups, and postoperative facial numbness was not observed. A statistically significant difference in radiation exposure parameters was revealed: radiation time was 181.67 ± 2.99 and 310.50 ± 18.46 seconds (p < 0.001); dose area product was 950.97 ± 115.41 and 1545.48 ± 135.04 µGy*m 2 (p < 0.005); and the air kerma reference point was 114.53 ± 16.81 and 190.88 ± 17.48 mGy (p < 0.005) in groups 1 and 2, respectively. The severity of pain during a puncture needle insertion was assessed as mild in 62.5% and 25%, moderate in 37.5% and 41.6%, and severe in 0% and 33.3% of patients in groups 1 and 2, respectively. No serious perioperative complications were observed. CONCLUSIONS The use of 3D PPM allows for controlled needle insertion, reducing the radiation dose to the patient and medical staff, reducing pain during a puncture needle insertion into the area of the foramen ovale, and minimizing the risk of postoperative complications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Trigeminal NeuralgiaPrinting, Three-DimensionalTrigeminal GanglionHumansMaleFemaleMiddle AgedPuncturesNeedlesAgedAdultTomography, X-Ray ComputedMaxilla

Stichwörter der Autor:innen

bipolar high-voltage radiofrequency therapyfunctional neurosurgerygasserian ganglionpainradiofrequency needle guidesurgical technique

Autor:innen und Institutionen

  • 1Department of Neurosurgery, I.M. Sechenov First Moscow State Medical University (Sechenov University), Moscow, Russian Federation.
  • 2Federal Centre of Neurosurgery of Ministry of Health of the Russian Federation, Tyumen, Russian Federation.
  • 3Educational and Research Institute of Neurosurgery, Peoples' Friendship University of Russia (RUDN University), Moscow, Russian Federation.
  • 4Department of Neurosurgery, King Edward Medical University (KEMU), Lahore, Pakistan.
  • 5Department of Pharmacology, Tyumen State Medical University of the Russian Ministry of Health, Tyumen, Russia.
  • 6Department of Neurosurgery, Federal University of Paraná, Curitiba, Brazil.

Zitieren

APA

Sufianov, A. A., Garifullina, N. A., Zyryanov, A. N., Shapkin, A. G., Borba, L. A. B., Baldoncini, M., & Sufianov, R. A. (2025). Designing and clinical application of a 3D-printed personalized model of a radiofrequency needle guide with a maxillary fixator for puncture of the gasserian ganglion for trigeminal neuralgia treatment. Journal of Neurosurgery. https://doi.org/10.3171/2024.8.jns24196

Vancouver

Sufianov AA, Garifullina NA, Zyryanov AN, Shapkin AG, Borba LAB, Baldoncini M, et al. Designing and clinical application of a 3D-printed personalized model of a radiofrequency needle guide with a maxillary fixator for puncture of the gasserian ganglion for trigeminal neuralgia treatment. Journal of Neurosurgery. 2025. doi:10.3171/2024.8.jns24196

BibTeX
@article{Sufianov2025,
  author = {Sufianov, Albert A and Garifullina, Nargiza A and Zyryanov, Aleksandr N and Shapkin, Andrey G and Borba, Luis A B and Baldoncini, Matias and Sufianov, Rinat A},
  title = {Designing and clinical application of a 3D-printed personalized model of a radiofrequency needle guide with a maxillary fixator for puncture of the gasserian ganglion for trigeminal neuralgia treatment},
  journal = {Journal of Neurosurgery},
  year = {2025},
  doi = {10.3171/2024.8.jns24196}
}
Kostenlos starten →