EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving The Mechanical Performance of High Modulus Asphalt Mixtures Using Nanoclay

Madyan Al-Attar, Mohammed Ismael

Journal of Engineering · 01.03.2026 · 32 (3) · 65-81

DOI: 10.31026/j.eng.2026.03.05 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 01.03.2026. Verfasst von Madyan Al-Attar und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effect of nanoclay (NC) additives on the mechanical performance of high modulus asphalt mixtures (EME). The research studied NC at four different binder weight percentages (0 %, 2 %, 4 %, 6 %) through Marshall stability tests and indirect tensile strength (ITS) and resilient modulus (MR) evaluations at 5 °C, 25 °C and 40 °C. The results showed substantial improvements across all performance indicators. The Marshall stability increased by 20.7 % when NC reached 6% but flow values decreased by 18.2 % for NC values between 4 % and 6 % because of enhanced permanent deformation resistance. The ITS values showed a 16.5 % increase which demonstrated better tensile strength performance. The MR values showed significant growth at all test temperatures which reached 55 % at 5 °C and 66.7 % at 25 °C and 64.6 % at 40 °C. The material demonstrated better elastic recovery through these tests, which were conducted at different thermal conditions. The mixture containing 6 % NC reached a richness modulus (K) value exceeding 3.4, which fulfilled the EME2 classification requirements. Statistical analysis (ANOVA) and mechanical evaluation identified 4% NC as the optimal dosage, as it achieved the maximum Marshall stiffness (6.18 kN/mm), while further increases to 6 % did not yield statistically significant improvements. The research shows nanoclay acts as an effective modifier that enhances both structural and mechanical properties of EME mixtures.

Zitieren

APA

Al-Attar, M., & Ismael, M. (2026). Improving The Mechanical Performance of High Modulus Asphalt Mixtures Using Nanoclay. Journal of Engineering, 32(3), 65-81. https://doi.org/10.31026/j.eng.2026.03.05

Vancouver

Al-Attar M, Ismael M. Improving The Mechanical Performance of High Modulus Asphalt Mixtures Using Nanoclay. Journal of Engineering. 2026;32(3):65-81. doi:10.31026/j.eng.2026.03.05

BibTeX
@article{AlAttar2026,
  author = {Al-Attar, Madyan and Ismael, Mohammed},
  title = {Improving The Mechanical Performance of High Modulus Asphalt Mixtures Using Nanoclay},
  journal = {Journal of Engineering},
  year = {2026},
  volume = {32},
  number = {3},
  pages = {65--81},
  doi = {10.31026/j.eng.2026.03.05}
}
Kostenlos starten →