Self-Healing Performance of Nanoclay-Modified Asphalt Concrete Wearing Course (AC-WC) Mixtures
Engineering, Technology & Applied Science Research · 06.06.2026 · 16 (3) · 36590-36599
DOI: 10.48084/etasr.18437 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 06.06.2026. Verfasst von Sri Sunarjono und 8 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The deterioration of AC-WC due to repetitive traffic loading and environmental exposure significantly shortens pavement service life. Enhancing the intrinsic self-healing capability of asphalt mixtures through nanomaterial modification has emerged as a promising approach to mitigate this issue. This study investigates the self-healing performance of AC-WC mixtures modified with nanoclay derived from locally sourced clay. Nanoclay was produced using a soaking-filtration method and characterized using Scanning Electron Microscopy combined with Energy-Dispersive X-ray spectroscopy (SEM-EDX), confirming nanoscale particle dimensions of approximately 250 nm and a dominant silica and alumina content. Asphalt binders modified with various nanoclay contents were evaluated for penetration, specific gravity, softening point, and ductility. AC-WC Marshall specimens were prepared and tested under three conditions: initial, controlled damaged (approximately 20-25% reduction in stability), and thermally healed (60°C for 24 hours followed by room-temperature conditioning). Self-healing performance was evaluated using a Marshall stability-based Self-Healing Index (SHI), which provides a practical indicator of strength recovery at the mixture scale. The results indicate that nanoclay modification significantly influences the physical and mechanical properties of asphalt mixtures. Nanoclay addition reduced penetration and ductility while increasing specific gravity and softening point, indicating enhanced stiffness and improved resistance to temperature-induced deformation. Self-healing performance improved at moderate nanoclay contents, with the highest SHI value of 0.65 achieved at 4% nanoclay addition, compared to 0.49 for the unmodified mixture. However, higher nanoclay contents reduced healing efficiency due to increased stiffness and particle agglomeration, which restricted molecular diffusion during the healing phase. These findings suggest that nanoclay can enhance both mechanical performance and strength recovery of AC-WC mixtures when applied at an optimal dosage. The use of locally sourced nanoclay further highlights its potential as a sustainable and practical additive for improving pavement durability in conventional engineering applications.
Zitieren
APA
Sunarjono, S., Rani, H. A., Mahardhika, R. K., Syammaun, T., Rachman, F., Hidayati, N., Azmi, H., Ayob, A., & Ngafwan (2026). Self-Healing Performance of Nanoclay-Modified Asphalt Concrete Wearing Course (AC-WC) Mixtures. Engineering, Technology & Applied Science Research, 16(3), 36590-36599. https://doi.org/10.48084/etasr.18437
Vancouver
Sunarjono S, Rani HA, Mahardhika RK, Syammaun T, Rachman F, Hidayati N, et al. Self-Healing Performance of Nanoclay-Modified Asphalt Concrete Wearing Course (AC-WC) Mixtures. Engineering, Technology & Applied Science Research. 2026;16(3):36590-36599. doi:10.48084/etasr.18437
BibTeX
@article{Sunarjono2026,
author = {Sunarjono, Sri and Rani, Hafnidar A. and Mahardhika, Rakha Kalam and Syammaun, Tamalkhani and Rachman, Firmansyah and Hidayati, Nurul and Azmi, Hafidzul and Ayob, Afizah and Ngafwan},
title = {Self-Healing Performance of Nanoclay-Modified Asphalt Concrete Wearing Course (AC-WC) Mixtures},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {3},
pages = {36590--36599},
doi = {10.48084/etasr.18437}
}
EUVIMED