EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Balanced Mix Design and Performance Analysis of High-Modulus Asphalt Mixtures

Qirong Li, Jiwei Liu, Jilong Yang, Xinquan Xu, Xinhai Liu, Peiwen Hao, Ningbo Li

Materials · 30.06.2026 · 19 (13) · 2777

DOI: 10.3390/ma19132777 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.06.2026. Verfasst von Qirong Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Road and Bridge Construction and Development Co., Ltd., Guangzhou 510623, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Provincial Communications Group, the Department of Science and Technology of Guangdong Province, Department of Science and Technology of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study was to design mixtures that satisfy multiple performance criteria to build long-life pavement. A balanced mix design was employed to optimize AC-16, BBME-13, and EME-20 mixtures. The initial asphalt contents were determined using 4% air voids for the AC-16 mixture and the abundance coefficient K for BBME-13 and EME-20. Mixtures with two additional asphalt contents were also tested. A uniaxial penetration test, semi-circle bending test (to measure the flexibility index), and semi-circle bending test (to measure fracture energy) were used as performance tests. Then, a performance space diagram was created for a balanced analysis of the mixtures’ high-, intermediate-, and low-temperature performance. Finally, fatigue performance was verified. The results show that BMD could be used to evaluate different asphalt mixtures. The 20# BBME-13 (5.1%, 5.4%, and 5.7%), 50# BBME-13 5.4%, and 20# AC-16 4.7% mixtures had well-balanced performances and are recommended. The BBME-13 and EME-20 mixtures had higher fatigue lives and lower sensitivity to stress than the AC-16 mixture. For the BBME-13 and AC-16 mixtures, reducing the asphalt grade significantly increased fatigue life and decreased the sensitivity to stress. At a low stress ratio, the 20# EME-20 mixture had the best fatigue performance, whereas at a high stress ratio, the 20# BBME-13 mixture had the best fatigue performance.

Schlagwörter

Stichwörter der Autor:innen

asphalt mixturebalanced evaluationbalanced mix designfatigue performancepavement performance

Autor:innen und Institutionen

  • Guangdong Road and Bridge Construction and Development Co., Ltd., Guangzhou 510623, China.
  • School of Highway, Chang'an University, Xi'an 710064, China.
  • Guangdong Jiaoke Technology Development Co., Ltd., Guangzhou 510550, China.
  • School of Highway Engineering, Shaanxi College of Communication Technology, Xi'an 710018, China.

Förderung

  • Guangdong Provincial Communications Group
  • the Department of Science and Technology of Guangdong Province
  • Department of Science and Technology of Guangdong Province

Zitieren

APA

Li, Q., Liu, J., Yang, J., Xu, X., Liu, X., Hao, P., & Li, N. (2026). Balanced Mix Design and Performance Analysis of High-Modulus Asphalt Mixtures. Materials, 19(13), 2777. https://doi.org/10.3390/ma19132777

Vancouver

Li Q, Liu J, Yang J, Xu X, Liu X, Hao P, et al. Balanced Mix Design and Performance Analysis of High-Modulus Asphalt Mixtures. Materials. 2026;19(13):2777. doi:10.3390/ma19132777

BibTeX
@article{Li2026,
  author = {Li, Qirong and Liu, Jiwei and Yang, Jilong and Xu, Xinquan and Liu, Xinhai and Hao, Peiwen and Li, Ningbo},
  title = {Balanced Mix Design and Performance Analysis of High-Modulus Asphalt Mixtures},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2777},
  doi = {10.3390/ma19132777}
}
Kostenlos starten →