Effect of PWHT on Laser-Welded Duplex Stainless Steel
Welding Journal · 01.07.2020 · 99 (7) · 185s-202s
DOI: 10.29391/2020.99.018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Welding Journal, online erschienen am 01.07.2020. Verfasst von APARECIDA SILVA MAGALHÃES und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).
Abstract (Originalsprache)
The welded joints of duplex stainless steels (DSSs) have been widely used in petrochemical, nuclear, pulp, and paper industries. Welds require a good, superficial finishing and a combination of mechanical and corrosion properties in these types of high-quality, demanding applications. Even though laser welding promotes narrow weld beads and a small heat-affected zone, when it is applied to DSSs, it can produce dangerous microstructural discontinuities. In this context, the effects of subsequent heat treatments on the microstructure, corrosion resistance, microhardness, and tensile proper-ties of DSS laser-welded joints are investigated. In this study, samples of UNS S32304 DSS were submitted to two different conditions of laser welding. Subsequently, the plates submitted to the best welding condition were subjected to isothermal heat treatments at different temperatures (850°, 950°, 1050°, and 1150°C) for 10 min. Then they were microstructurally characterized. Phase fraction measurements and microhardness tests were performed. Based on the obtained results, postweld heat-treated samples at 1150°C, which is the best condition, were subjected to corrosion and tensile tests. It was possible to conclude the corrosion prop-erties of the welded joint were significantly improved after the heat treatment. However, the mechanical behavior was strongly influenced by the presence of volumetric discontinuities and intermetallic compounds, which considerably deteriorated the mechanical strength of the material.
Zitieren
APA
MAGALHÃES, A. S., MAGALHÃES, C. H. X. M., GODEFROID, L. B., FARIA, G. L. D., LIMA, M. S. F. D., CRUZ, J., & BERTAZZOLI, R. (2020). Effect of PWHT on Laser-Welded Duplex Stainless Steel. Welding Journal, 99(7), 185s-202s. https://doi.org/10.29391/2020.99.018
Vancouver
MAGALHÃES AS, MAGALHÃES CHXM, GODEFROID LB, FARIA GLD, LIMA MSFD, CRUZ J, et al. Effect of PWHT on Laser-Welded Duplex Stainless Steel. Welding Journal. 2020;99(7):185s-202s. doi:10.29391/2020.99.018
BibTeX
@article{MAGALHES2020,
author = {MAGALHÃES, APARECIDA SILVA and MAGALHÃES, CHARLES HENRIQUE XAVIER MORAIS and GODEFROID, LEONARDO BARBOSA and FARIA, GERALDO LÚCIO DE and LIMA, MILTON SERGIO FERNANDES DE and CRUZ, JULIANE and BERTAZZOLI, RODNEI},
title = {Effect of PWHT on Laser-Welded Duplex Stainless Steel},
journal = {Welding Journal},
year = {2020},
volume = {99},
number = {7},
pages = {185s--202s},
doi = {10.29391/2020.99.018}
}
EUVIMED