EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deposition of ZnO/α-F2O3 Nanocomposites on Screen-Printed Electrodes for Electrochemical Arsenic Detection

Sreymean Ngok, Magnus Willander, Omer Nur

Nano-Horizons: Journal of Nanosciences and Nanotechnologies · 2025

DOI: 10.25159/3005-2602/20057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nano-Horizons: Journal of Nanosciences and Nanotechnologies, 2025. Verfasst von Sreymean Ngok und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing a robust screen-printed electrochemical sensor for the determination of As5+ in drinking water based on metal oxide nanocomposite is still a challenging task. In this article, the development of electrochemical sensors by using ZnO/α-Fe2O3 nanoparticles (NPs) deposited on a screen-printed carbon electrode (SPCE) for As5+ detection is presented. The SPCE was modified by drop casting of ZnO NPs and α-Fe2O3NPs on the SPCE and used as a working electrode. This electrode was analysed for different concentrations of α-Fe2O3NPs and ZnO NPs. The samples were denoted 2.5 wt% F, 5 wt% F, 7.5 wt% F, 2.5 wt% Z, 5 wt% Z and 7.5 wt% Z, depending on the weight percentage of the NPs. The properties of the nanocomposite were characterised by UV-vis, FESEM and XRD. Moreover, the electrochemical characteristics were also analysed via linear sweep voltammetry in different water solutions with a wide range of arsenic concentrations from 0 to 50 µg/L. The results were analysed for different concentrations of both of the NPs. The best performance sample was then identified and used for further analysis. From the electrochemical studies, the sensor attained a low detection limit of 2.7 ppb for As5+, which is below the maximum allowable limit recommended by the World Health Organization for standard drinking water. Consequently, the results confirm that the electrochemical catalytic activity of ZnO/α-Fe2O3NPs/SPCE with 2.5 wt% ZF can be used as an efficient electrode to further develop an As5+ sensor system for analysis of real samples.

Zitieren

APA

Ngok, S., Willander, M., & Nur, O. (2025). Deposition of ZnO/α-F2O3 Nanocomposites on Screen-Printed Electrodes for Electrochemical Arsenic Detection. Nano-Horizons: Journal of Nanosciences and Nanotechnologies. https://doi.org/10.25159/3005-2602/20057

Vancouver

Ngok S, Willander M, Nur O. Deposition of ZnO/α-F2O3 Nanocomposites on Screen-Printed Electrodes for Electrochemical Arsenic Detection. Nano-Horizons: Journal of Nanosciences and Nanotechnologies. 2025. doi:10.25159/3005-2602/20057

BibTeX
@article{Ngok2025,
  author = {Ngok, Sreymean and Willander, Magnus and Nur, Omer},
  title = {Deposition of ZnO/α-F2O3 Nanocomposites on Screen-Printed Electrodes for Electrochemical Arsenic Detection},
  journal = {Nano-Horizons: Journal of Nanosciences and Nanotechnologies},
  year = {2025},
  doi = {10.25159/3005-2602/20057}
}
Kostenlos starten →