Influence of Infill Density on Dimensional and Geometrical Deviations of PLA Parts Fabricated by FDM
Studia Universitatis Babeș-Bolyai Engineering · 24.03.2026 · 22-40
DOI: 10.24193/subbeng.2025.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Studia Universitatis Babeș-Bolyai Engineering, online erschienen am 24.03.2026. Verfasst von Raul-Rusalin Turiac und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The study investigates the influence of infill density on the dimensional and geometric deviations of Polylactic Acid (PLA) cubic specimens manufactured using Fused Deposition Modeling (FDM). Five infill levels (20–100%) were analyzed, while all other process parameters were kept constant. Flatness, parallelism, perpendicularity, and dimensional measurements were performed using a Mitutoyo MiSTAR 555 coordinate measuring machine, providing micron-level accuracy. The results show that infill density has selective and direction-dependent effects on geometric accuracy, without indicating a general trend applicable to all types of deviations. A linear increase in printing time and specimen mass was also observed as infill density increased, indicating a direct impact on manufacturing cost.
Zitieren
APA
Turiac, R., Korka, Z., Aman, A., & Magda, M. (2026). Influence of Infill Density on Dimensional and Geometrical Deviations of PLA Parts Fabricated by FDM. Studia Universitatis Babeș-Bolyai Engineering, 22-40. https://doi.org/10.24193/subbeng.2025.3
Vancouver
Turiac R, Korka Z, Aman A, Magda M. Influence of Infill Density on Dimensional and Geometrical Deviations of PLA Parts Fabricated by FDM. Studia Universitatis Babeș-Bolyai Engineering. 2026:22-40. doi:10.24193/subbeng.2025.3
BibTeX
@article{Turiac2026,
author = {Turiac, Raul-Rusalin and Korka, Zoltan-Iosif and Aman, Alexandra-Teodora and Magda, Mihael},
title = {Influence of Infill Density on Dimensional and Geometrical Deviations of PLA Parts Fabricated by FDM},
journal = {Studia Universitatis Babeș-Bolyai Engineering},
year = {2026},
pages = {22--40},
doi = {10.24193/subbeng.2025.3}
}
EUVIMED