COMPUTATIONAL MODELING AND SOFTWARE IMPLEMENTATION FOR THE ANALYSIS OF REGENERATIVE SELF-EXCITED VIBRATIONS IN TITANIUM ALLOY MACHINING
Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (2) · 47-61
DOI: 10.23939/ujmems2026.02.047 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Vadym Stupnytskyy und 2 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.
Abstract (Originalsprache)
The present article focuses on regenerative self-oscillations that occur during the milling of Ti-6Al-4V, a widely used titanium alloy that is difficult to machine. It has been demonstrated that self-oscillations do not represent a random by-product of the cutting process; rather, they emerge as a consequence of a delay in the feedback loop between the current position of the tool and the undulating trail left by the preceding pass of the milling cutter tooth. The "memory" of the machined surface is a key factor in determining the variable chip thickness, fluctuations in cutting force, and the potential transition of the process to an unstable regime. This paper presents a novel engineering methodology for assessing milling stability. This methodology is based on a single-mass dynamic model of the technological system comprised of the machine, fixture, tool, and workpiece. The method involves determining the lag between tooth passes, calculating dynamic compliance and the critical cutting depth, numerically integrating the motion equation with lag, and evaluating amplitude growth using the root-mean-square (RMS) criterion. This study focuses on elucidating the non-monotonic dependence of self-oscillation amplitude on spindle rotation frequency. It is demonstrated that a minor alteration in spindle speed can either stabilize the process or intensify vibrations sharply, owing to a modification in the phase relationship between successive tooth passes. The proposed methodology has been implemented as an application software product developed in Python. The program facilitates expeditious modification of cutting and tool parameters, as well as the dynamic characteristics of the machining system. It enables the construction of time-domain vibration representations, the assessment of critical modes, and the comparison of process stabilization options. The results obtained are of interest to researchers of cutting dynamics and to process engineers working with difficult-to-machine materials. The approach outlined in the article can be used to make preliminary predictions of stable milling zones. This approach has the potential to reduce the number of experimental trials, thereby increasing tool stability and improving the quality of the machined surface. Furthermore, it can facilitate informed selection of machining parameters under production conditions.
Zitieren
APA
Stupnytskyy, V., Novitskyi, Y., & Ben, Y. (2026). COMPUTATIONAL MODELING AND SOFTWARE IMPLEMENTATION FOR THE ANALYSIS OF REGENERATIVE SELF-EXCITED VIBRATIONS IN TITANIUM ALLOY MACHINING. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(2), 47-61. https://doi.org/10.23939/ujmems2026.02.047
Vancouver
Stupnytskyy V, Novitskyi Y, Ben Y. COMPUTATIONAL MODELING AND SOFTWARE IMPLEMENTATION FOR THE ANALYSIS OF REGENERATIVE SELF-EXCITED VIBRATIONS IN TITANIUM ALLOY MACHINING. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(2):47-61. doi:10.23939/ujmems2026.02.047
BibTeX
@article{Stupnytskyy2026,
author = {Stupnytskyy, Vadym and Novitskyi, Yurii and Ben, Yurii},
title = {COMPUTATIONAL MODELING AND SOFTWARE IMPLEMENTATION FOR THE ANALYSIS OF REGENERATIVE SELF-EXCITED VIBRATIONS IN TITANIUM ALLOY MACHINING},
journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
year = {2026},
volume = {12},
number = {2},
pages = {47--61},
doi = {10.23939/ujmems2026.02.047}
}
EUVIMED