EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Beam Machining of Titanium Alloy—A Review

Alokesh Pramanik, Animesh Kumar Basak

Metals · 30.08.2023 · 13 (9) · 1536

DOI: 10.3390/met13091536 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 30.08.2023. Verfasst von Alokesh Pramanik und 1 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the laser beam machining mechanism, surface formation mechanisms, heat-affected zone, taper formation, and the dimensional deviation of the titanium alloy, based on the information available in literature. The heat induced by the laser beam melts and vaporises titanium alloy, which is removed by a high pressure-assisted gas. The machined titanium alloy surface is expected to have craters and resolidified materials which were contributed by the low thermal conductivity of the titanium alloy. Taper and circularity error can be minimised by optimising the laser parameter, but it cannot be avoided in the laser beam machining of titanium alloy. Laser beam machining induces a non-diffusion phase transformation, which slightly changes the surface mechanical properties of the titanium alloys. Laser beam machining is gaining popularity as a way to improve the surface finish quality and properties of titanium components manufactured by additive manufacturing processes. To enhance the machining efficacy of titanium alloys, several hybrid machining processes were proposed.

Zitieren

APA

Pramanik, A., & Basak, A. K. (2023). Laser Beam Machining of Titanium Alloy—A Review. Metals, 13(9), 1536. https://doi.org/10.3390/met13091536

Vancouver

Pramanik A, Basak AK. Laser Beam Machining of Titanium Alloy—A Review. Metals. 2023;13(9):1536. doi:10.3390/met13091536

BibTeX
@article{Pramanik2023,
  author = {Pramanik, Alokesh and Basak, Animesh Kumar},
  title = {Laser Beam Machining of Titanium Alloy—A Review},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1536},
  doi = {10.3390/met13091536}
}
Kostenlos starten →