Variations in Microstructural, Thermal, and Mechanical Properties of Different CAD/CAM Lithium Disilicate Reinforced Glass Ceramics
Operative Dentistry · 2025
DOI: 10.2341/24-133-l ↗Kurz gefasst
Fachartikel in der Zeitschrift Operative Dentistry, 2025. Verfasst von L N Tavares und 5 weiteren Autor:innen. Beteiligte Einrichtung: Lucas do Nascimento Tavares, DDS, MSc, PhD, School of Dentistry, Federal University of Uberlândia, MG, Brazil. Hauptthemen laut MEDLINE: Dental Porcelain, Computer-Aided Design, Ceramics. Die Arbeit nennt 38 Literaturangaben.
Abstract (Originalsprache)
Purpose
This study compared four CAD/CAM lithium disilicate-reinforced glass ceramic systems (IPS e.max CAD, Rosetta SM CAD, T-lithium CAD, and IRIS CAD) regarding their crystalline and microstructural characteristics, thermal properties, mechanical strength, and bonding to a resin cement. Methods and Materials: The crystalline and morphological characteristics of the ceramic microstructure were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), thermal behavior was assessed via differential thermal analysis (DTA). Mechanical properties were evaluated using a biaxial flexural strength test, and bonding to a resin cement was measured with a microshear strength test at distinct storage times. Data were evaluated using analysis of variance and Tukey HSD tests (α = 0.05).
Results
High peak positions corresponding to standard lithium metasilicate and lithium disilicate with similar intensities were observed for all ceramics in the XRD analysis. SEM morphological analysis showed differences in crystal characteristics among the ceramics after HF etching. The DTA thermograms showed a crystallization process ranging from 812-872°C among the different ceramic systems. The IRIS system showed the lowest flexural strength values, while bond strengths to resin cement remained comparable among materials, regardless of storage time.
Conclusions
Most lithium disilicate ceramic systems demonstrated acceptable characteristics in the tests performed, except for IRIS, which showed shortcomings in crystal morphology and mechanical strength, along with inconsistent thermal behavior. These findings underscore the importance of careful material selection to ensure durable dental restorations.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Lucas do Nascimento Tavares, DDS, MSc, PhD, School of Dentistry, Federal University of Uberlândia, MG, Brazil.
- Danilo Cassiano Ferraz, DDS, MSc, PhD, School of Dentistry, Federal University of Uberlândia, MG, Brazil.
- Karen Katlein Dolenkei, DDS, MSc, graduate student, School of Dentistry, Federal University of Uberlândia, MG, Brazil.
- Karla Zancopé, DDS, MSc, PhD, adjunct professor, Department of Occlusion, Fixed Prosthodontics and Dental Materials, School of Dentistry, Federal University of Uberlândia, MG, Brazil.
- Anielle Christine Almeida Silva, BSP, MSc, PhD, adjunct professor, Strategic Materials Laboratory, Institute of Physics, Federal University of Alagoas, AL, Brazil.
- *Luís Henrique Araújo Raposo, DDS, MSc, PhD, associate professor, Department of Occlusion, Fixed Prosthodontics and Dental Materials, School of Dentistry, Federal University of Uberlândia, MG, Brazil.
Zitieren
APA
Tavares, L. N., Ferraz, D. C., Dolenkei, K. K., Zancopé, K., Almeida Silva, A. C., & Raposo, L. H. (2025). Variations in Microstructural, Thermal, and Mechanical Properties of Different CAD/CAM Lithium Disilicate Reinforced Glass Ceramics. Operative Dentistry. https://doi.org/10.2341/24-133-l
Vancouver
Tavares LN, Ferraz DC, Dolenkei KK, Zancopé K, Almeida Silva AC, Raposo LH. Variations in Microstructural, Thermal, and Mechanical Properties of Different CAD/CAM Lithium Disilicate Reinforced Glass Ceramics. Operative Dentistry. 2025. doi:10.2341/24-133-l
BibTeX
@article{Tavares2025,
author = {Tavares, L N and Ferraz, D C and Dolenkei, K K and Zancopé, K and Almeida Silva, A C and Raposo, L H},
title = {Variations in Microstructural, Thermal, and Mechanical Properties of Different CAD/CAM Lithium Disilicate Reinforced Glass Ceramics},
journal = {Operative Dentistry},
year = {2025},
doi = {10.2341/24-133-l}
}
EUVIMED