EUVIMEDEUVIMED entdecken
Crossref

Flexural Properties, Wear Resistance, and Microstructural Analysis of Highly Filled Flowable Resin Composites

P Francois, J P Attal, T Fasham, M Troizier-Cheyne, H Gouze, S Abdel-Gawad, S Le Goff, E Dursun, R Ceinos

Operative Dentistry · 2024

DOI: 10.2341/24-033-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2024. Verfasst von P Francois und 8 weiteren Autor:innen. Beteiligte Einrichtung: Philippe Francois, DDS, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University; Bretonnea…. Hauptthemen laut MEDLINE: Composite Resins, Flexural Strength, Materials Testing, Microscopy, Electron, Scanning. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

This study aimed to evaluate the flexural properties and two-body wear resistance of nine highly filled flowable resin composites relative to those of viscous and conventional low-filled flowable composites. In addition, scanning electron microscopy (SEM) analysis of the microstructures was performed. Methods and Materials: For each resin composite group (n=12), 12 specimen bars (25 mm × 2 mm × 2 mm) were fabricated using a silicon mold for performing flexural strength (FS), flexural modulus (E), flexural toughness (FT), Weibull modulus (m) tests, and SEM microstructural analysis. For each group, ten bars were tested using a three-point flexural test on a universal testing machine, while the other two were embedded in acrylic resin before being observed by SEM for structural analysis. During the two-body wear test with a chewing simulator, 8 specimens (12 groups, n=8) of each resin composite group were manufactured in a specific mold and subjected to 120,000 cycles of wear against a steatite ball, and the depth loss was measured. Three one-way ANOVA tests followed by Tukey's post hoc tests were conducted to compare the flexural and wear properties among the different groups.

Results

The majority of highly filled composites tested in this study exhibited similar flexural strengths (between 105.68 MPa and 135.49 MPa) and superior wear resistance to those of viscous composites. The flexural moduli (between 5.12 GPa and 9.62 GPa) of these composites were in between those of the viscous and low-filled composites tested in this study.

Conclusions

The highly filled flowable composites tested in this study exhibited different in vitro properties but were often superior to those of viscous resin composite suggesting their possible use for posterior restorations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsFlexural StrengthMaterials TestingMicroscopy, Electron, ScanningDental Stress AnalysisSurface PropertiesDental Restoration WearDental MaterialsViscosityElastic ModulusHumansMethacrylates

Substanzen

Composite ResinsDental Materialsflowable hybrid compositeMethacrylates

Autor:innen und Institutionen

  • Philippe Francois, DDS, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University; Bretonneau Hospital, Paris, France.
  • Jean-Pierre Attal, DDS, PhD, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University; Charles Foix Hospital, Ivry-sur-Seine, France.
  • Timothy Fasham, DDS, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University; Bretonneau Hospital, Paris, France.
  • Max Troizier-Cheyne, DDS, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University; Bretonneau Hospital, Paris, France.
  • Hélène Gouze, MD, Department of Rheumatology, Ambroise Paré Hospital, Boulogne, France; Centre for Research in Epidemiology and Population Health U1808, Paris Saclay University, Villejuif, France.
  • Sarah Abdel-Gawad, EMSE, Faculty of Dental Surgery, Innovative Dental Materials and Interfaces Research Unit (URB2i), Paris Cité University, Paris, France.

Zitieren

APA

Francois, P., Attal, J. P., Fasham, T., Troizier-Cheyne, M., Gouze, H., Abdel-Gawad, S., Le Goff, S., Dursun, E., & Ceinos, R. (2024). Flexural Properties, Wear Resistance, and Microstructural Analysis of Highly Filled Flowable Resin Composites. Operative Dentistry. https://doi.org/10.2341/24-033-l

Vancouver

Francois P, Attal JP, Fasham T, Troizier-Cheyne M, Gouze H, Abdel-Gawad S, et al. Flexural Properties, Wear Resistance, and Microstructural Analysis of Highly Filled Flowable Resin Composites. Operative Dentistry. 2024. doi:10.2341/24-033-l

BibTeX
@article{Francois2024,
  author = {Francois, P and Attal, J P and Fasham, T and Troizier-Cheyne, M and Gouze, H and Abdel-Gawad, S and Le Goff, S and Dursun, E and Ceinos, R},
  title = {Flexural Properties, Wear Resistance, and Microstructural Analysis of Highly Filled Flowable Resin Composites},
  journal = {Operative Dentistry},
  year = {2024},
  doi = {10.2341/24-033-l}
}
Kostenlos starten →