Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic
Operative Dentistry · 2024
DOI: 10.2341/23-124-l ↗Kurz gefasst
Fachartikel in der Zeitschrift Operative Dentistry, 2024. Verfasst von E T Calixto und 5 weiteren Autor:innen. Beteiligte Einrichtung: Emerson Tavares Calixto, DDS, MSc student, Ingá University Center, Uningá, Maningá, PR, Brazil. Hauptthemen laut MEDLINE: Dental Porcelain, Silanes, Ceramics, Dental Bonding. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben.
Abstract (Originalsprache)
Objectives
This study aimed to evaluate the impact of various commercial silane brands with varied chemical compositions with or without the application of an adhesive layer on the microshear bond strength and durability of a resin luting agent to lithium disilicate glass ceramic. Methods and Materials: Lithium disilicate glass ceramic discs (EMX, IPS e.max Press, Ivoclar Vivadent) measuring 10 mm in diameter and 3 mm in thickness were fabricated (n=240). Surfaces were etched using 5% hydrofluoric acid and randomly assigned to 10 groups based on the commercial brand of silane used (n=24): [RP] RelyX Ceramic Primer (3M ESPE); [PS] Prosil (FGM); [SA] Silano (Angelus); [SM] Silano (Maquira); [SU] Silane (Ultradent); [GL] GLUMA Ceramic Primer (Kulzer); [CB] Ceramic Bond (VOCO); [MB] Monobond N (Ivoclar Vivadent); [CP] Clearfil Ceramic Primer (Kuraray); and [DE] 2-step silane (Dentsply Sirona). Half of the EMXs (n=12) received a thin adhesive layer (+) after the silane and prior to resin luting agent, while the other half (n=12) did not receive an adhesive layer (-). For the microshear bond strength test (μSBS), four light-cured resin luting agent cylinders (1 mm in diameter) were created on each EMX surface. Half of these specimens were tested after 24 hours, while the other half were stored in deionized water for 6 months. The μSBS test was conducted using a universal testing machine (DL 500, EMIC) at a crosshead speed of 1 mm/min until failure. The obtained data underwent statistical analysis using analysis of variance (ANOVA) and the Tukey test (α=0.05).
Results
There was significant influence of the silane commercial brand on bond strength. Notably, “universal primers” yielded lower bond strength results compared to “pure” silane solutions. Water storage had a detrimental effect on microshear bond strength for certain silane commercial brands. Additionally, the application of an adhesive layer negatively impacted bond strength results for all silanes.
Conclusions
This study confirms the importance of both silane commercial brand and chemical composition in relation to bond strength of resin luting agents to lithium disilicate glass ceramic. Furthermore, the application of an adhesive layer may have an adverse effect on bond stability over time.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Emerson Tavares Calixto, DDS, MSc student, Ingá University Center, Uningá, Maningá, PR, Brazil.
- Vinicius Fernandez Kelmer, DDS student, Ingá University Center, Uningá, Maningá, PR, Brazil.
- Gabriely Hikari Komegae, DDS, MSc student, Ingá University Center, Uningá, Maningá, PR, Brazil.
- Rafael Rocha Pacheco, DDS, MSc, PhD, associate professor and section director of Dental Materials, Department of Restorative Sciences, The Dental College of Georgia at Augusta University, Augusta, GA, USA.
- Nubia Inocencya Pavesi Pini, DDS, MSc, PhD, adjunct professor, School of Dentistry, Department of Restorative Dentistry and Prosthodontics, Ingá University Center, Uningá, Maningá, PR, Brazil.
- *Daniel Sundfeld, DDS, MSc, PhD, adjunct professor, Department of Restorative Dentistry and Prosthodontics, Ingá University Center, Uningá, Maningá, PR, Brazil.
Zitieren
APA
Calixto, E. T., Kelmer, V. F., Komegae, G. H., Pacheco, R. R., Pini, N., & Sundfeld, D. (2024). Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic. Operative Dentistry. https://doi.org/10.2341/23-124-l
Vancouver
Calixto ET, Kelmer VF, Komegae GH, Pacheco RR, Pini N, Sundfeld D. Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic. Operative Dentistry. 2024. doi:10.2341/23-124-l
BibTeX
@article{Calixto2024,
author = {Calixto, E T and Kelmer, V F and Komegae, G H and Pacheco, R R and Pini, Nip and Sundfeld, D},
title = {Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic},
journal = {Operative Dentistry},
year = {2024},
doi = {10.2341/23-124-l}
}
EUVIMED