An in vitro study on the bond strength between composite resin and porcelain using different surface treatment and bonding methods
European Journal of Oral Sciences · 2025-06 · 133 (3)
DOI: 10.1111/eos.70014 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift European Journal of Oral Sciences, online erschienen am 05.05.2025. Verfasst von Mina Aker Sagen und 3 weiteren Autor:innen. Beteiligte Einrichtung: Nordic Institute of Dental Materials, Oslo, Norway. Hauptthemen laut MEDLINE: Dental Bonding, Composite Resins, Dental Porcelain. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Funding by Nordic Institute of Dental Materials (NIOM), Oslo, Norway, Department of Prosthetic Dentistry, Institute of Clinical Dentistry, Faculty of Dentistry, University of Oslo, Oslo, Norway..
Abstract (Originalsprache)
The study aimed to determine the effect of different surface treatments and bonding methods on bond strength between composite resin and feldspar ceramic, focusing on the interplay between these variables for enhanced clinical outcomes of chipping repair. Two surface treatments (hydrofluoric acid [HF] etching and surface roughening using a diamond disc) were investigated alongside two bonding methods utilizing either a universal adhesive (Scotchbond Universal, 3M) or a separate silane primer and adhesive (Intraoral Repair Kit, BISCO). Bond strength was measured using shear forces, and light microscopy was used to analyse the fracture mode. The findings indicate that the bonding method plays a more significant role than surface treatment for increasing bond strength since bond strength was similar following either roughening or HF acid etching. The separate silane primer and adhesive demonstrated superior bond strength over the universal adhesive, despite both containing silane, and this was attributed to differences in silane monomer stability. Selecting an appropriate bonding method, specifically using separate silane primer, enhances bond strength in composite repairs. This approach may mitigate the known risks associated with HF and addresses clinical challenges by optimizing the bond stability between feldspathic porcelain and composite resin.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Nordic Institute of Dental Materials, Oslo, Norway.
- Institute for Clinical Dentistry, Faculty of Odontology, University of Oslo, Oslo, Norway.
ORCID-Profile: Mina Aker Sagen, Bjørk Eriksen, Kaja Moland, Bjørn Einar Dahl
Förderung
- Funding by Nordic Institute of Dental Materials (NIOM), Oslo, Norway
- Department of Prosthetic Dentistry, Institute of Clinical Dentistry, Faculty of Dentistry, University of Oslo, Oslo, Norway.
Zitieren
APA
Sagen, M. A., Eriksen, B., Moland, K., & Dahl, B. E. (2025). An in vitro study on the bond strength between composite resin and porcelain using different surface treatment and bonding methods. European Journal of Oral Sciences, 133(3). https://doi.org/10.1111/eos.70014
Vancouver
Sagen MA, Eriksen B, Moland K, Dahl BE. An in vitro study on the bond strength between composite resin and porcelain using different surface treatment and bonding methods. European Journal of Oral Sciences. 2025;133(3). doi:10.1111/eos.70014
BibTeX
@article{Sagen2025,
author = {Sagen, Mina Aker and Eriksen, Bjørk and Moland, Kaja and Dahl, Bjørn Einar},
title = {An in vitro study on the bond strength between composite resin and porcelain using different surface treatment and bonding methods},
journal = {European Journal of Oral Sciences},
year = {2025},
volume = {133},
number = {3},
doi = {10.1111/eos.70014}
}
EUVIMED