EUVIMEDEUVIMED entdecken
Crossref

Effects of Hydrofluoric Acid Concentrations, Commercial Brands, and Adhesive Application on the Bond Strength of a Resin Luting Agent to Lithium Disilicate Glass Ceramic

Drc Dos Santos, R R Pacheco, G H Komegae, J A da Silva, Danl Lima, Nip Pini, D Sundfeld

Operative Dentistry · 2023-11 · 48 (6) · 700-710

DOI: 10.2341/23-034-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2023-11. Verfasst von Drc Dos Santos und 6 weiteren Autor:innen. Beteiligte Einrichtung: Diogo Robert Claudino dos Santos, DDS, MSc student, Department of Restorative Dentistry and Prosthodontics, Ingá University Center - UNINGÁ, Maringá,…. Hauptthemen laut MEDLINE: Hydrofluoric Acid, Dental Bonding. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To evaluate the surface topography/roughness and bond strength of a resin luting agent to a lithium disilicate glass ceramic after etching with different concentrations of hydrofluoric acid (HF) and commercial brands.

Methods

For bond strength evaluation, 260 lithium disilicate glass ceramic (EMX) discs were randomly distributed into 13 groups based on concentrations of HF and commercial brands (n=20): 5% and 10%, Lysanda (LY5 and LY10); 5% and 10%, Maquira (MA5 and MA10); 5% and 10%, FGM (FG5 and FG10); 4.8%, Ivoclar Vivadent (IV5); 5% and 10%, PHS do Brasil (PH5 and PH10); 5% and 10%, BM4 (BM5 and BM10); 9%, Ultradent Inc (UL10); and Dentsply (DE10). A further random distribution (n=10) was made based on the application (+) or absence (−) of an adhesive layer. Resin luting agent cylinders (1 mm in diameter) were added on EMX surfaces, light-cured, and stored for 24 hours in deionized water at 37°C. On a universal testing machine (DL 500, EMIC), specimens were submitted to a microshear bond strength test at a crosshead speed of 1 mm/min until failure. A representative etched EMX disc from each group underwent surface topography analysis using field-emission scanning electron microscopy (n=1), and five (n=5) etched EMX discs from each group were tested for surface roughness. Data were statistically analyzed using analysis of variance and Tukey test (α=0.05).

Results

A less conditioned and smoother surface was observed for 5% HF compared to 10%. Additionally, commercial brands of HF were shown to affect bond strength. When the adhesive layer was not used (−), a 10% concentration promoted higher bond strengths to EMX. However, when adhesive was applied (+), the concentrations of HF and commercial brands had no effect on bond strength results.

Conclusions

A 10% concentration of HF results in higher bond strength than a 5% concentration. If an adhesive layer is applied, neither this distinction nor the influence of commercial brands is observed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Hydrofluoric AcidDental BondingDental CementsSurface PropertiesMaterials TestingCeramicsDental PorcelainResin CementsSilanes

Substanzen

Glass ceramicslithia disilicateHydrofluoric AcidDental CementsDental PorcelainResin CementsSilanes

Autor:innen und Institutionen

  • Diogo Robert Claudino dos Santos, DDS, MSc student, Department of Restorative Dentistry and Prosthodontics, Ingá University Center - UNINGÁ, Maringá, PR, Brazil.
  • Rafael Rocha Pacheco, DDS, MSc, PhD, associate professor, Department of Restorative Sciences, Dental College of Georgia - Augusta University, Augusta, GA, USA.
  • Gabriely Hikari Komegae, DDS student, School of Dentistry, Ingá University Center - UNINGÁ, Maringá, PR, Brazil.
  • Juliana Andrade da Silva, DDS, MSc, PhD student, Department of Restorative Dentistry, Piracicaba School of Dentistry, University of Campinas - UNICAMP, Piracicaba, SP, Brazil.
  • Debora Alves Nunes Leite Lima, DDS, MSc, PhD, professor, Department of Restorative Dentistry, Piracicaba School of Dentistry, University of Campinas - UNICAMP, Piracicaba, SP, Brazil.
  • Nubia Inocêncya Pavesi Pini, DDS, MSc, PhD, adjunct professor, Department of Restorative Dentistry and Prosthodontics, Ingá University Center - UNINGÁ, Maringá, PR, Brazil.

Zitieren

APA

Dos Santos, D., Pacheco, R. R., Komegae, G. H., da Silva, J. A., Lima, D., Pini, N., & Sundfeld, D. (2023). Effects of Hydrofluoric Acid Concentrations, Commercial Brands, and Adhesive Application on the Bond Strength of a Resin Luting Agent to Lithium Disilicate Glass Ceramic. Operative Dentistry, 48(6), 700-710. https://doi.org/10.2341/23-034-l

Vancouver

Dos Santos D, Pacheco RR, Komegae GH, da Silva JA, Lima D, Pini N, et al. Effects of Hydrofluoric Acid Concentrations, Commercial Brands, and Adhesive Application on the Bond Strength of a Resin Luting Agent to Lithium Disilicate Glass Ceramic. Operative Dentistry. 2023;48(6):700-710. doi:10.2341/23-034-l

BibTeX
@article{DosSantos2023,
  author = {Dos Santos, Drc and Pacheco, R R and Komegae, G H and da Silva, J A and Lima, Danl and Pini, Nip and Sundfeld, D},
  title = {Effects of Hydrofluoric Acid Concentrations, Commercial Brands, and Adhesive Application on the Bond Strength of a Resin Luting Agent to Lithium Disilicate Glass Ceramic},
  journal = {Operative Dentistry},
  year = {2023},
  volume = {48},
  number = {6},
  pages = {700--710},
  doi = {10.2341/23-034-l}
}
Kostenlos starten →