The Impact of Different Surface Treatments on Topography and Bond Strength of Resin Cement to Lithium Disilicate Glass Ceramic
Operative Dentistry · 2023
DOI: 10.2341/21-130-l ↗Kurz gefasst
Fachartikel in der Zeitschrift Operative Dentistry, 2023. Verfasst von J D Noronha Filho und 7 weiteren Autor:innen. Beteiligte Einrichtung: Jaime Dutra Noronha Filho, DDS, MSc, PhD, Analytical Laboratory of Restorative Biomaterials (LABiom-R), School of Dentistry, Universidade Federal Flu…. Hauptthemen laut MEDLINE: Resin Cements, Dental Bonding. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben.
Abstract (Originalsprache)
Objective
To evaluate the influence of different surface treatments on topography, surface roughness, surface energy, and microtensile bond strength stability of resin cement to lithium disilicate glass ceramic. Methods and Materials Seventy disc-shaped specimens of IPS e.max Press were divided into seven groups according to the surface treatment: NT – non-treated (control); FSil − hydrofluoric acid (HF) + silane; FPSil − HF + phosphoric acid (HP) + silane; FUSil − HF + ultrasonic bath (U) + silane; FPUSil − HF + HP + U + silane; MEP − Monobond Etch and Prime (MEP); and MEPH − MEP + heating. Topography and surface roughness were evaluated using a 3D laser confocal microscope (3DLCM) and scanning electron microscopy (SEM) and surface energy with a goniometer. The microtensile bond strength (μTBS) was evaluated after storage in distilled water at 37°C for 24 hours and after thermocycling (5,000 cycles, 5°–55° C, 30-second dwell time). Data were analyzed using one-way ANOVA (surface roughness and surface energy), two-way ANOVA (μTBS), Tukey′s HSD post-hoc test, and Student t-test (α=0.05).
Results
FUSil, FPSil, and FSil presented similar and highest surface roughness, whereas NT, FPUSil, MEP, and MEPH showed similar, and lowest, roughness values ( p
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Jaime Dutra Noronha Filho, DDS, MSc, PhD, Analytical Laboratory of Restorative Biomaterials (LABiom-R), School of Dentistry, Universidade Federal Fluminense, Niterói, Rio de Janeiro, Brazil.
- Gabriella Edde Delforge, DDS, MSc, Analytical Laboratory of Restorative Biomaterials (LABiom-R), School of Dentistry, Universidade Federal Fluminense, Niterói, Rio de Janeiro, Brazil.
- Yutao Xing, BSc, MSc, DSc, High-resolution Electron Microscopy Lab, Advanced Characterization Center for Petroleum Industry, Fluminense Federal University, Niterói, Rio de Janeiro, Brazil.
- Mariana da Cruz Silva Trugilho Duarte, Analytical Laboratory of Restorative Biomaterials (LABiom-R), School of Dentistry, Universidade Federal Fluminense, Niterói, Rio de Janeiro, Brazil.
- Igor Studart Medeiros, DDS, MSc, PhD, Department of Biomaterials and Oral Biology, School of Dentistry, Universidade de São Paulo, São Paulo, Brazil.
- Tiago Braga Rabello, DDS, MSc, PhD, Department of Dental Clinic, School of Dentistry, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil.
Zitieren
APA
Noronha Filho, J. D., Delforge, G. E., Xing, Y., da Cruz Silva Trugilho Duarte, M., Medeiros, I. S., Rabello, T. B., Poskus, L. T., & da Silva, E. M. (2023). The Impact of Different Surface Treatments on Topography and Bond Strength of Resin Cement to Lithium Disilicate Glass Ceramic. Operative Dentistry. https://doi.org/10.2341/21-130-l
Vancouver
Noronha Filho JD, Delforge GE, Xing Y, da Cruz Silva Trugilho Duarte M, Medeiros IS, Rabello TB, et al. The Impact of Different Surface Treatments on Topography and Bond Strength of Resin Cement to Lithium Disilicate Glass Ceramic. Operative Dentistry. 2023. doi:10.2341/21-130-l
BibTeX
@article{NoronhaFilho2023,
author = {Noronha Filho, J D and Delforge, G E and Xing, Y and da Cruz Silva Trugilho Duarte, M and Medeiros, I S and Rabello, T B and Poskus, L T and da Silva, E M},
title = {The Impact of Different Surface Treatments on Topography and Bond Strength of Resin Cement to Lithium Disilicate Glass Ceramic},
journal = {Operative Dentistry},
year = {2023},
doi = {10.2341/21-130-l}
}
EUVIMED