EUVIMEDEUVIMED entdecken
Crossref

Influence of the Crystallization Firing Process on Marginal and Internal Adaptation of Silicate-based Glass-ceramic Inlays Fabricated With a CAD/CAM Chairside System

M Kobayashi, Y Niizuma, R Sugai, A Manabe

Operative Dentistry · 2023

DOI: 10.2341/22-120-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2023. Verfasst von M Kobayashi und 3 weiteren Autor:innen. Beteiligte Einrichtung: *Mikihiro Kobayashi, DDS, PhD, Department of Conservative Dentistry, Division of Aesthetic Dentistry and Clinical Cariology, Showa University School …. Hauptthemen laut MEDLINE: Inlays, Dental Marginal Adaptation. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

Computer-aided design/computer-aided manufacturing (CAD/CAM) systems are widely used in dental treatment. Clinicians can use chairside CAD/CAM technology, which has the advantage of being able to fabricate inlays on the same day. We aimed to evaluate the effects of crystallization firing processes, fabrication methods (one-step and two-step), and materials on marginal and internal adaptations of silicate-based glass-ceramic all-ceramic inlays fabricated with CAD/CAM chairside systems.

Methods

Ten artificial mandibular left first molars were prepared with standardized ceramic class II mesialocclusal (MO) inlay cavities. Optical impressions were obtained using CEREC Omnicam Ban. IPS e-max CAD (IE), (Ivoclar Vivadent, Schaan, Liechtenstein), Initial LiSi Block (LS) (Hongo, Bunkyoku, Tokyo, Japan), VITA Suprinity (SP), (Vita Zahnfabrick, Bad Säckingen, Germany), and Celtra Duo (CD) (Ivoclar Vivadent, Schaan, Liechtenstein) (n=10) were milled using CEREC MC XL (Bensheim, Germany). IE and SP were crystallization-fired using CEREC Speed Fire. The silicone replica technique was used for the measurement of internal (axial and pulpal walls) and marginal (cervical and occlusal edge) adaptations. The adaptations were measured using a thin layer of light-body polyvinyl siloxane impression material placed between the master tooth inlay preparation and restoration. Marginal and internal adaptations of IE, LS, SP, and CD were measured using a stereomicroscope (500×). For IE and SP, marginal and internal adaptations were measured before and after the crystallization firing process. Data analyses were conducted using one-way ANOVA and the Tukey test. For IE and SP, marginal and internal adaptations before and after the crystallization firing process were analyzed using the t -test. The significance level was set at α=0.05.

Results

One-way ANOVA revealed statistically significant differences in occlusal and cervical edge marginal adaptations among the material groups ( p

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

InlaysDental Marginal AdaptationCrystallizationDental Prosthesis DesignMaterials TestingDental PorcelainCeramicsComputer-Aided DesignSilicatesAcrylic ResinsComposite ResinsPolyurethanes

Substanzen

Dental PorcelainSilicatesVivadentAcrylic ResinsComposite ResinsPolyurethanes

Autor:innen und Institutionen

  • *Mikihiro Kobayashi, DDS, PhD, Department of Conservative Dentistry, Division of Aesthetic Dentistry and Clinical Cariology, Showa University School of Dentistry, Tokyo, Japan.
  • Yuiko Niizuma, DDS, PhD, Department of Conservative Dentistry, Division of Aesthetic Dentistry and Clinical Cariology, Showa University School of Dentistry, Tokyo, Japan.
  • Rintaro Sugai, DDS, Department of Conservative Dentistry, Division of Aesthetic Dentistry and Clinical Cariology, Showa University School of Dentistry, Tokyo, Japan.
  • Atsufumi Manabe, Department of Conservative Dentistry, Division of Aesthetic Dentistry and Clinical Cariology, Showa University School of Dentistry, Tokyo, Japan.

Zitieren

APA

Kobayashi, M., Niizuma, Y., Sugai, R., & Manabe, A. (2023). Influence of the Crystallization Firing Process on Marginal and Internal Adaptation of Silicate-based Glass-ceramic Inlays Fabricated With a CAD/CAM Chairside System. Operative Dentistry. https://doi.org/10.2341/22-120-l

Vancouver

Kobayashi M, Niizuma Y, Sugai R, Manabe A. Influence of the Crystallization Firing Process on Marginal and Internal Adaptation of Silicate-based Glass-ceramic Inlays Fabricated With a CAD/CAM Chairside System. Operative Dentistry. 2023. doi:10.2341/22-120-l

BibTeX
@article{Kobayashi2023,
  author = {Kobayashi, M and Niizuma, Y and Sugai, R and Manabe, A},
  title = {Influence of the Crystallization Firing Process on Marginal and Internal Adaptation of Silicate-based Glass-ceramic Inlays Fabricated With a CAD/CAM Chairside System},
  journal = {Operative Dentistry},
  year = {2023},
  doi = {10.2341/22-120-l}
}
Kostenlos starten →