Effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia
Journal of Oral Science · 2025
DOI: 10.2334/josnusd.25-0083 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Oral Science, 2025. Verfasst von Shoko Miura und 5 weiteren Autor:innen. Beteiligte Einrichtung: Division of Fixed Prosthodontics, Department of Restorative & Biomaterials Sciences, Meikai University School of Dentistry. Hauptthemen laut MEDLINE: Zirconium, Yttrium, Dental Materials. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science, Scandinavia-Japan Sasakawa Foundation.
Abstract (Originalsprache)
PURPOSE: This laboratory-based study evaluated the effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia. METHODS: Three partially stabilized zirconia (PSZ) materials, one monolayer (HT) and two multilayer (GE, FX) samples, with thicknesses of 0.5-1.5 mm were tested under conventional and speed sintering protocols. Translucency parameter (TP), color difference (ΔE00), and spectral reflectance were measured using a spectrophotometer against standardized black and white backgrounds. Statistical analyses were performed using a one-way analysis of variance, Tukey's post-hoc tests, and correlation analysis. RESULTS: The TP values decreased with increasing zirconia thickness; significant differences were observed between the sintering protocols. Speed sintering resulted in lower transparency in certain materials, particularly GE. Conversely, HT exhibited consistent optical properties across the sintering protocols. The ΔE00 values for multilayer zirconia exceeded clinically acceptable thresholds, with greater variations observed for thicker specimens. Spectral reflectance curves were minimally influenced by the sintering protocol and thickness for monolayer zirconia, whereas they showed significant variations for multilayer zirconia. CONCLUSION: The results indicate that sintering protocols and material composition significantly influence the optical properties of zirconia, underscoring the necessity of optimizing processing conditions to enhance both esthetic and functional performance in clinical applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Division of Fixed Prosthodontics, Department of Restorative & Biomaterials Sciences, Meikai University School of Dentistry.
- Department of Biomaterials Science and Turku Clinical Biomaterials Center-TCBC, Institute of Dentistry, University of Turku.
- Welfare District of South-West Finland.
Förderung
- Japan Society for the Promotion of Science
- Scandinavia-Japan Sasakawa Foundation
Zitieren
APA
Miura, S., Tsukada, S., Fujita, T., Fujisawa, M., Vallittu, P., & Lassila, L. (2025). Effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia. Journal of Oral Science. https://doi.org/10.2334/josnusd.25-0083
Vancouver
Miura S, Tsukada S, Fujita T, Fujisawa M, Vallittu P, Lassila L. Effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia. Journal of Oral Science. 2025. doi:10.2334/josnusd.25-0083
BibTeX
@article{Miura2025,
author = {Miura, Shoko and Tsukada, Shohei and Fujita, Takafumi and Fujisawa, Masanori and Vallittu, Pekka and Lassila, Lippo},
title = {Effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia},
journal = {Journal of Oral Science},
year = {2025},
doi = {10.2334/josnusd.25-0083}
}
EUVIMED