Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions
Journal of Mining and Metallurgy, Section B: Metallurgy · 2026 · 62 (1) · 81-90
DOI: 10.2298/jmmb250811007s ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mining and Metallurgy, Section B: Metallurgy, 2026. Verfasst von Mariola Spalik und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Aluminum alloying is commonly used to improve high-temperature oxidation resistance. In this study, Al was incorporated into nanocrystalline coatings produced by magnetron sputtering of 310S chromium–nickel steel. The effect of this addition on the phase composition and morphology of the coatings, which influence the formation of protective oxide layers under high-temperature conditions, was investigated. The coatings were analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM), with emphasis on surface roughness, as well as X-ray diffractometry (XRD) to determine crystallite size and phase composition. The results showed that the addition of aluminum affects phase stability in the coatings. At Al contents of 1–2 at.%, there is a twofold reduction in the fraction of the fcc phase in the coating (and its disappearance at 5 at.%), along with a similar decrease in surface roughness. At the same time, crystallite size increases while the nanocrystalline structure is retained, creating favorable conditions for the formation of dense Al₂O₃ oxide layers on the coatings.
Zitieren
APA
Spalik, M., Kucharska, B., Jakubus, A., & Krzywoszyja, G. (2026). Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions. Journal of Mining and Metallurgy, Section B: Metallurgy, 62(1), 81-90. https://doi.org/10.2298/jmmb250811007s
Vancouver
Spalik M, Kucharska B, Jakubus A, Krzywoszyja G. Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions. Journal of Mining and Metallurgy, Section B: Metallurgy. 2026;62(1):81-90. doi:10.2298/jmmb250811007s
BibTeX
@article{Spalik2026,
author = {Spalik, Mariola and Kucharska, Barbara and Jakubus, Aneta and Krzywoszyja, Grzegorz},
title = {Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions},
journal = {Journal of Mining and Metallurgy, Section B: Metallurgy},
year = {2026},
volume = {62},
number = {1},
pages = {81--90},
doi = {10.2298/jmmb250811007s}
}
EUVIMED