Corrosion Resistance of ALD Al₂O₃ Coatings on 310S Stainless Steel for Fencing Applications in Tropical Forest Environments
Metalurgija · 22.05.2026 · 66 (1) · 51-63
DOI: 10.64486/m.66.1.5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metalurgija, online erschienen am 22.05.2026. Verfasst von Li Zhan und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This study investigates the corrosion protection of 310S stainless steel by Al₂O₃ coatings prepared using an ozone-assisted atomic layer deposition (ALD) process. A dense and uniform Al₂O₃ coating with a thickness of approximately 150 nm was deposited on the steel surface. The coating morphology, phase composition, adhesion, high-temperature oxidation resistance, and corrosion behavior were evaluated using SEM/EDS, AFM, XRD, Vickers indentation, immersion tests, and electrochemical measurements. The results show that the ALD Al₂O₃ coating effectively covers surface defects, exhibits good adhesion to the substrate, and significantly improves corrosion resistance in chloride-containing and acidic media. The coated sample also maintains structural integrity after oxidation at 800 °C, indicating improved high-temperature stability and reduced chromium outward diffusion. These results demonstrate that ozone-assisted ALD Al₂O₃ coating is a promising surface protection method for 310S stainless steel used in outdoor fencing and ecological protection applications.
Zitieren
APA
Zhan, L., & Jiang, Y. (2026). Corrosion Resistance of ALD Al₂O₃ Coatings on 310S Stainless Steel for Fencing Applications in Tropical Forest Environments. Metalurgija, 66(1), 51-63. https://doi.org/10.64486/m.66.1.5
Vancouver
Zhan L, Jiang Y. Corrosion Resistance of ALD Al₂O₃ Coatings on 310S Stainless Steel for Fencing Applications in Tropical Forest Environments. Metalurgija. 2026;66(1):51-63. doi:10.64486/m.66.1.5
BibTeX
@article{Zhan2026,
author = {Zhan, Li and Jiang, Yanli},
title = {Corrosion Resistance of ALD Al₂O₃ Coatings on 310S Stainless Steel for Fencing Applications in Tropical Forest Environments},
journal = {Metalurgija},
year = {2026},
volume = {66},
number = {1},
pages = {51--63},
doi = {10.64486/m.66.1.5}
}
EUVIMED