EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on Thermally Fatigued Phase Transformation and Bending Fracture Mechanisms of 310S Stainless Steel

Ying-Ting Huang, Yu-Wei Yen, Fei-Yi Hung iD

Materials · 05.06.2025 · 18 (11) · 2654

DOI: 10.3390/ma18112654 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.06.2025. Verfasst von Ying-Ting Huang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Cheng Kung University, Tainan 701401, Taiwan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Walsin Lihwa Co., Ltd., Instrument Center of National Cheng Kung University of the Ministry of Science and Technology of Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the microstructural evolution and mechanical degradation mechanisms of cold-drawn 310S stainless steel subjected to repeated thermal cycling between 900 °C and room temperature. The results reveal that thermal cycling induces significant lattice distortion, dislocation accumulation, and recrystallization, leading to grain refinement and increased tensile strength. However, these microstructural changes also initiate subsurface cracks and reduce ductility. TGA analysis confirms thermal weight loss from decarburization, especially under oxidative atmospheres. EPMA analysis and tensile tests after thermal cycling reveal that surface cracks formed during thermal cycling act as origins for transgranular crack propagation under tensile stress, significantly reducing fracture resistance. Bending fatigue tests further demonstrate that thermally fatigued specimens exhibit inferior fatigue life compared to raw material, confirming the deteriorating mechanical properties of 310S stainless steel after thermal cycling. Overall, the combined effects of thermal and mechanical fatigue degrade the structural integrity of 310S stainless steel, revealing that lattice distortion and subsurface cracking are the key factors in its embrittlement and reduced fatigue performance.

Schlagwörter

Stichwörter der Autor:innen

310STEMbendingtensile propertiesthermal cycling

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Cheng Kung University, Tainan 701401, Taiwan.

ORCID-Profile: Fei-Yi Hung

Förderung

  • Walsin Lihwa Co., Ltd.
  • Instrument Center of National Cheng Kung University of the Ministry of Science and Technology of Taiwan

Zitieren

APA

Huang, Y. T., Yen, Y. W., & Hung, F. Y. (2025). A Study on Thermally Fatigued Phase Transformation and Bending Fracture Mechanisms of 310S Stainless Steel. Materials, 18(11), 2654. https://doi.org/10.3390/ma18112654

Vancouver

Huang YT, Yen YW, Hung FY. A Study on Thermally Fatigued Phase Transformation and Bending Fracture Mechanisms of 310S Stainless Steel. Materials. 2025;18(11):2654. doi:10.3390/ma18112654

BibTeX
@article{Huang2025,
  author = {Huang, Ying-Ting and Yen, Yu-Wei and Hung, Fei-Yi},
  title = {A Study on Thermally Fatigued Phase Transformation and Bending Fracture Mechanisms of 310S Stainless Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2654},
  doi = {10.3390/ma18112654}
}
Kostenlos starten →