Using Wear Time for the Analysis of Consumer-Grade Wearables’ Data: Case Study Using Fitbit Data
JMIR mHealth and uHealth · 2025-03-21 · 13 · e46149-e46149
DOI: 10.2196/46149 ↗At a glance
Journal article in JMIR mHealth and uHealth, published online on 2025-03-21. Written by Loubna Baroudi and 5 co-authors. Institution: Department of Mechanical Engineering, University of Michigan-Ann Arbor, 2505 Hayward St, Ann Arbor, MI, 48109, United States, 1 7342626353. Major MEDLINE topics: Wearable Electronic Devices. Cited 12 times so far (Crossref); 29 references. The full text is freely available in PubMed Central. Funded by: NHLBI NIH HHS, NINR NIH HHS, NCATS NIH HHS.
Abstract (original language)
Background
Consumer-grade wearables allow researchers to capture a representative picture of human behavior in the real world over extended periods. However, maintaining users’ engagement remains a challenge and can lead to a decrease in compliance (eg, wear time in the context of wearable sensors) over time (eg, “wearables’ abandonment”).
Objective
In this work, we analyzed datasets from diverse populations (eg, caregivers for various health issues, college students, and pediatric oncology patients) to quantify the impact that wear time requirements can have on study results. We found evidence that emphasizes the need to account for participants’ wear time in the analysis of consumer-grade wearables data. In Aim 1, we demonstrate the sensitivity of parameter estimates to different data processing methods with respect to wear time. In Aim 2, we demonstrate that not all research questions necessitate the same wear time requirements; some parameter estimates are not sensitive to wear time.
Methods
We analyzed 3 Fitbit datasets comprising 6 different clinical and healthy population samples. For Aim 1, we analyzed the sensitivity of average daily step count and average daily heart rate at the population sample and individual levels to different methods of defining “valid” days using wear time. For Aim 2, we evaluated whether some research questions can be answered with data from lower compliance population samples. We explored (1) the estimation of the average daily step count and (2) the estimation of the average heart rate while walking.
Results
For Aim 1, we found that the changes in the population sample average daily step count could reach 2000 steps for different methods of analysis and were dependent on the wear time compliance of the sample. As expected, population samples with a low daily wear time (less than 15 hours of wear time per day) showed the most sensitivity to changes in methods of analysis. On the individual level, we observed that around 15% of individuals had a difference in step count higher than 1000 steps for 4 of the 6 population samples analyzed when using different data processing methods. Those individual differences were higher than 3000 steps for close to 5% of individuals across all population samples. Average daily heart rate appeared to be robust to changes in wear time. For Aim 2, we found that, for 5 population samples out of 6, around 11% of individuals had enough data for the estimation of average heart rate while walking but not for the estimation of their average daily step count.
Conclusions
We leveraged datasets from diverse populations to demonstrate the direct relationship between parameter estimates from consumer-grade wearable devices and participants’ wear time. Our findings highlighted the importance of a thorough analysis of wear time when processing data from consumer-grade wearables to ensure the relevance and reliability of the associated findings.
Subjects
MeSH terms (MEDLINE)
Author keywords
Authors and institutions
- Department of Mechanical Engineering, University of Michigan-Ann Arbor, 2505 Hayward St, Ann Arbor, MI, 48109, United States, 1 7342626353.
- Department of Orthopedic Surgery, University of Michigan-Ann Arbor, Ann Arbor, MI, United States.
- Exercise & Sport Science Initiative, University of Michigan-Ann Arbor, Ann Arbor, MI, United States.
- Center for Computational Medicine and Bioinformatics, University of Michigan-Ann Arbor, Ann Arbor, MI, United States.
- Department of Internal Medicine, University of Michigan-Ann Arbor, Ann Arbor, MI, United States.
- Department of Biomedical Engineering, University of Michigan-Ann Arbor, Ann Arbor, MI, United States.
ORCID profiles: Loubna Baroudi, Ronald Fredrick Zernicke, Muneesh Tewari, Noelle E Carlozzi, Sung Won Choi, Stephen M Cain
Funding
- NHLBI NIH HHS
- NINR NIH HHS
- NCATS NIH HHS
Cite
APA
Baroudi, L., Zernicke, R. F., Tewari, M., Carlozzi, N. E., Choi, S. W., & Cain, S. M. (2025). Using Wear Time for the Analysis of Consumer-Grade Wearables’ Data: Case Study Using Fitbit Data. JMIR mHealth and uHealth, 13, e46149-e46149. https://doi.org/10.2196/46149
Vancouver
Baroudi L, Zernicke RF, Tewari M, Carlozzi NE, Choi SW, Cain SM. Using Wear Time for the Analysis of Consumer-Grade Wearables’ Data: Case Study Using Fitbit Data. JMIR mHealth and uHealth. 2025;13:e46149-e46149. doi:10.2196/46149
BibTeX
@article{Baroudi2025,
author = {Baroudi, Loubna and Zernicke, Ronald Fredrick and Tewari, Muneesh and Carlozzi, Noelle E and Choi, Sung Won and Cain, Stephen M},
title = {Using Wear Time for the Analysis of Consumer-Grade Wearables’ Data: Case Study Using Fitbit Data},
journal = {JMIR mHealth and uHealth},
year = {2025},
volume = {13},
pages = {e46149--e46149},
doi = {10.2196/46149}
}
EUVIMED