EUVIMEDScopri EUVIMED
Crossref

Marginal Fit of Fixed Bridges Made Using Accelerated-type Gypsum-bonded Investments

Jing Tan, Yasushi Mori, Jiro Kishii, Mutsuo Yamauchi, Kenji Suwa, Mitsuaki Okada, Kenichiro Kasamura, Tooru Nagasawa

Prosthodontic Research & Practice · 2003

DOI: 10.2186/prp.2.76 ↗

At a glance

Journal article in Prosthodontic Research & Practice, 2003. Written by Jing Tan and 7 co-authors. 15 references.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Purpose

This study evaluated the marginal fit of fixed bridges constructed using accelerated-type gypsum-bonded investment and compared them with fixed bridges constructed using conventional-type investment.Materials and Methods : Four types of accelerated-type gypsum-bonded investment and one type of conventional-type investment were used. A three-unit fixed bridge was cast in 12% gold-silver-palladium alloy and Type III gold alloy using different types of investment. Each bridge was seated in the master die, and the margins were inspected via microscopy.

Results

The results failed to show any significant differences between the bridges constructed from either alloy using the accelerated gypsum-bonded investment and those constructed using the conventional investment. In most of the investments, the gold bridges had slightly smaller marginal gaps than the 12% gold-silver-palladium alloy bridges, but the differences were not significant.

Conclusion

The results obtained indicated that the fit of fixed bridges made in accelerated gypsum-bonded investment is similar to that of bridges made in conventional investment.

Cite

APA

Tan, J., Mori, Y., Kishii, J., Yamauchi, M., Suwa, K., Okada, M., Kasamura, K., & Nagasawa, T. (2003). Marginal Fit of Fixed Bridges Made Using Accelerated-type Gypsum-bonded Investments. Prosthodontic Research & Practice. https://doi.org/10.2186/prp.2.76

Vancouver

Tan J, Mori Y, Kishii J, Yamauchi M, Suwa K, Okada M, et al. Marginal Fit of Fixed Bridges Made Using Accelerated-type Gypsum-bonded Investments. Prosthodontic Research & Practice. 2003. doi:10.2186/prp.2.76

BibTeX
@article{Tan2003,
  author = {Tan, Jing and Mori, Yasushi and Kishii, Jiro and Yamauchi, Mutsuo and Suwa, Kenji and Okada, Mitsuaki and Kasamura, Kenichiro and Nagasawa, Tooru},
  title = {Marginal Fit of Fixed Bridges Made Using Accelerated-type Gypsum-bonded Investments},
  journal = {Prosthodontic Research & Practice},
  year = {2003},
  doi = {10.2186/prp.2.76}
}
Start for free →