EUVIMEDEUVIMED entdecken
Crossref

Elucidation of the bonding mechanism of acidic and sulfur-based monomers to heat-treated copper-containing gold alloys

Kosuke Takehana, Haruto Hiraba, Hiroyasu Koizumi, Takayuki Yoneyama

Journal of Prosthodontic Research · 2026

DOI: 10.2186/jpr.jpr_d_25_00233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Kosuke Takehana und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials, Nihon University School of Dentistry, Tokyo, Japan. Hauptthemen laut MEDLINE: Copper, Hot Temperature, Sulfur, Dental Bonding. Die Arbeit nennt 26 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To elucidate how the combination of acidic and sulfur-based monomers enhances bonding to oxidized noble metal alloy surfaces. METHODS: Two types of gold alloys were used: one with a low copper content (DG) and the other with a high copper content (IV). Three primers were used: a sulfur-based monomer primer (VP), a phosphate-based acidic monomer primer (PZ), and a combination of both (MC). Two conditions were used: heated and non-heated. The shear bond strengths before and after thermocycling were determined and compared for each condition. Surface chemical analysis was performed using X-ray photoelectron spectroscopy (XPS). RESULTS: After thermocycling, the bond strength of MC was significantly higher than that of the VP under all conditions. In the comparison of alloys under heating conditions, IV showed a significantly higher bond strength than that of DG for the PZ and MC groups. XPS revealed peaks attributed to copper oxide (CuO) formation on the heated IV surface. CONCLUSIONS: Multipurpose primers are effective for bonding oxidized noble metal alloys and acrylic resins. The formation of CuO improves the performance of 10-methacryloyloxydecyl dihydrogen phosphate, and its combination with sulfur-based monomers is particularly effective for noble metal alloy surfaces with high copper content.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CopperHot TemperatureSulfurDental BondingGold AlloysMethacrylatesPhotoelectron SpectroscopySurface PropertiesShear StrengthMaterials TestingOxidation-Reduction

Stichwörter der Autor:innen

AdhesiveFunctional monomerNoble metal alloyOxide filmShear bond strength

Substanzen

CopperSulfurGold AlloysMethacrylatesmethacryloyloxydecyl dihydrogen phosphate

Autor:innen und Institutionen

  • Department of Dental Materials, Nihon University School of Dentistry, Tokyo, Japan.
  • Division of Biomaterials Science, Dental Research Center, Nihon University School of Dentistry, Tokyo, Japan.

Zitieren

APA

Takehana, K., Hiraba, H., Koizumi, H., & Yoneyama, T. (2026). Elucidation of the bonding mechanism of acidic and sulfur-based monomers to heat-treated copper-containing gold alloys. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_25_00233

Vancouver

Takehana K, Hiraba H, Koizumi H, Yoneyama T. Elucidation of the bonding mechanism of acidic and sulfur-based monomers to heat-treated copper-containing gold alloys. Journal of Prosthodontic Research. 2026. doi:10.2186/jpr.jpr_d_25_00233

BibTeX
@article{Takehana2026,
  author = {Takehana, Kosuke and Hiraba, Haruto and Koizumi, Hiroyasu and Yoneyama, Takayuki},
  title = {Elucidation of the bonding mechanism of acidic and sulfur-based monomers to heat-treated copper-containing gold alloys},
  journal = {Journal of Prosthodontic Research},
  year = {2026},
  doi = {10.2186/jpr.jpr_d_25_00233}
}
Kostenlos starten →