EUVIMEDEUVIMED entdecken
Crossref

Accuracy and mechanical properties of denture clasps fabricated utilizing pre-sintered Co-Cr alloy discs

Yuto Kato, Akinori Tasaka, Haruna Okano, Shinobu Uzawa, Shuichiro Yamashita

Journal of Prosthodontic Research · 2025

DOI: 10.2186/jpr.jpr_d_24_00186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2025. Verfasst von Yuto Kato und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Removable Partial Prosthodontics, Tokyo Dental College, Tokyo, Japan. Hauptthemen laut MEDLINE: Chromium Alloys, Denture, Partial, Removable, Dental Clasps, Denture Design. Die Arbeit nennt 31 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This study evaluated the use of pre-sintered cobalt-chromium (Co-Cr) alloy discs in the fabrication of clasps for removable partial dentures, comparing their accuracy and mechanical properties, as determined via tensile testing, with those of conventional fabrication methods. METHODS: Accuracy of the clasps was assessed by obtaining three-dimensional (3D) data (design data) of the Akers clasp. The clasps were fabricated under three conditions: (1) pre-sintered, fabricated from pre-sintered Co-Cr alloy discs; (2) fully sintered, fabricated from fully sintered Co-Cr alloy discs; and (3) cast, fabricated via casting. For each method, 3D data were collected (fabrication data). The design and fabrication data were subsequently superimposed, and the accuracy of the clasps was investigated based on their inner surfaces. The mechanical properties were assessed via tensile testing of dumbbell-shaped Co-Cr alloy specimens fabricated under the same conditions used for accuracy testing (pre-sintered, fully sintered, and cast). RESULTS: Cast clasps typically exhibited the highest trueness values and fully sintered clasps exhibited the highest precision values. The pre-sintered clasps exhibited high trueness in every part of the rest area; however, the accuracy at the clasp tip was low. In terms of mechanical properties, the pre-sintered clasps exhibited the highest elongation, meeting the standards for Type 4 metals as specified by ISO 22674:2022. CONCLUSIONS: The present study demonstrates that pre-sintered Co-Cr alloy discs are suitable for fabrication of clasps with good fit and mechanical properties, provided that the accuracy of the clasp tip is improved.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Chromium AlloysDenture, Partial, RemovableDental ClaspsDenture DesignTensile StrengthMaterials TestingMechanical PhenomenaCobaltDental Casting TechniqueSurface Properties

Stichwörter der Autor:innen

CAD/CAMMillingPre-sintered Co-Cr alloyRemovable partial dentures

Substanzen

Chromium AlloysCobalt

Autor:innen und Institutionen

  • Department of Removable Partial Prosthodontics, Tokyo Dental College, Tokyo, Japan.
  • Reality Dental Laboratory Co., Ltd, Tokyo, Japan.

Zitieren

APA

Kato, Y., Tasaka, A., Okano, H., Uzawa, S., & Yamashita, S. (2025). Accuracy and mechanical properties of denture clasps fabricated utilizing pre-sintered Co-Cr alloy discs. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_24_00186

Vancouver

Kato Y, Tasaka A, Okano H, Uzawa S, Yamashita S. Accuracy and mechanical properties of denture clasps fabricated utilizing pre-sintered Co-Cr alloy discs. Journal of Prosthodontic Research. 2025. doi:10.2186/jpr.jpr_d_24_00186

BibTeX
@article{Kato2025,
  author = {Kato, Yuto and Tasaka, Akinori and Okano, Haruna and Uzawa, Shinobu and Yamashita, Shuichiro},
  title = {Accuracy and mechanical properties of denture clasps fabricated utilizing pre-sintered Co-Cr alloy discs},
  journal = {Journal of Prosthodontic Research},
  year = {2025},
  doi = {10.2186/jpr.jpr_d_24_00186}
}
Kostenlos starten →