EUVIMEDEUVIMED entdecken
Crossref

Wear, Fatigue, and Fracture Resistance of Different Monolithic CAD/CAM Onlays as Abutments for Acetal Resin or Cobalt-Chromium Removable Partial Denture Frameworks

Hiba A Alshaiba, Nadia Khalifa, Zeina Al Doory, Hatem M El-Damanhoury

International Journal of Prosthodontics · 2023

DOI: 10.11607/ijp.8641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Prosthodontics, 2023. Verfasst von Hiba A Alshaiba und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Denture, Partial, Removable, Computer-Aided Design, Dental Abutments, Chromium Alloys. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To assess wear, fatigue, and fracture resistance of different CAD/CAM onlays, milled from monolithic Zirconia (Zr), hybrid ceramic (EN), and lithium disilicate (LS), when used as abutments for removable partial denture frameworks fabricated from acetal resin (AR) or cobalt-chromium (Co-Cr).

Methods

Standard onlays and RPD framework were designed and milled using CAD/CAM. Onlays were cemented with resin cement to identical teeth models. The RPD's occlusal rest surface and the ceramic onlays' rest seats were both 3D scanned before and after 750,000 mechanical load cycles (50 N) and 8,000 thermal cycles (5-55°C) in a chewing simulator. The volumetric loss was measured using 3D image processing software, and the failure of the samples was detected using a stereomicroscope. The fracture resistance was tested by loading to failure in a universal testing machine. The fatigue failure results were analyzed with Fisher's exact probability test and the wear and fracture resistance data were analyzed using two-way ANOVA and Bonferroni Post-hoc test (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Denture, Partial, RemovableComputer-Aided DesignDental AbutmentsChromium AlloysInlaysDental Stress AnalysisZirconiumMaterials TestingDental Restoration FailureDenture DesignDental Restoration WearDental PorcelainCeramics

Substanzen

Chromium AlloysZirconiumzirconium oxidelithia disilicateDental Porcelain

Zitieren

APA

Alshaiba, H. A., Khalifa, N., Doory, Z. A., & El-Damanhoury, H. M. (2023). Wear, Fatigue, and Fracture Resistance of Different Monolithic CAD/CAM Onlays as Abutments for Acetal Resin or Cobalt-Chromium Removable Partial Denture Frameworks. International Journal of Prosthodontics. https://doi.org/10.11607/ijp.8641

Vancouver

Alshaiba HA, Khalifa N, Doory ZA, El-Damanhoury HM. Wear, Fatigue, and Fracture Resistance of Different Monolithic CAD/CAM Onlays as Abutments for Acetal Resin or Cobalt-Chromium Removable Partial Denture Frameworks. International Journal of Prosthodontics. 2023. doi:10.11607/ijp.8641

BibTeX
@article{Alshaiba2023,
  author = {Alshaiba, Hiba A and Khalifa, Nadia and Doory, Zeina Al and El-Damanhoury, Hatem M},
  title = {Wear, Fatigue, and Fracture Resistance of Different Monolithic CAD/CAM Onlays as Abutments for Acetal Resin or Cobalt-Chromium Removable Partial Denture Frameworks},
  journal = {International Journal of Prosthodontics},
  year = {2023},
  doi = {10.11607/ijp.8641}
}
Kostenlos starten →