EUVIMEDEUVIMED entdecken
Crossref

Bonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation

Kaiqi Xu, Masanao Inokoshi, Kumiko Yoshihara, Masayuki Kakehata, Hidehiko Yashiro, Rena Takahashi, Mao Yamamoto, Shingo Kamijo, Masaomi Ikeda, Shunsuke Minakuchi

Journal of Prosthodontic Research · 2025 · 69 (3) · 436-446

DOI: 10.2186/jpr.jpr_d_24_00134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2025. Verfasst von Kaiqi Xu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japa…. Hauptthemen laut MEDLINE: Zirconium, Ceramics, Dental Porcelain, Dental Bonding. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 65 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This study investigated the effects of femtosecond laser (FL) irradiation on the surface roughness and shear bond strength of high-translucency zirconia (6 mol% yttria-partially stabilized zirconia [6Y-PSZ]) and lithium disilicate (Li2SiO3) glass ceramics. METHODS: Fully sintered square-shaped specimens of 6Y-PSZ (7 groups; 20 specimens/group) and Li2SiO3 (8 groups; 20 specimens/group) were surface-treated via sandblasting (50-μm alumina sand or glass beads) or FL irradiation (20- or 40-μm dot or cross-line patterns) or using Monobond Etch & Prime (Ivoclar Vivadent AG; only for Li2SiO3 specimens). The surface roughness (arithmetic average [Sa] and developed interfacial area ratio [Sdr]) and shear bond strength after 24 h and 10,000 thermal cycles were measured and statistically analyzed. RESULTS: The surface roughness of both ceramics significantly increased after 40-μm cross-line FL irradiation. The Sdr also significantly increased after FL irradiation. The 20- and 40-μm cross-line laser-irradiated 6Y-PSZ samples showed the highest shear bond strength after 24 h and 10,000 thermal cycles, respectively. Li2SiO3 glass-ceramic specimens showed the highest shear bond strength after Monobond Etch & Prime treatment for both groups. The 40-μm cross-line laser-irradiated Li2SiO3 glass-ceramic specimens exhibited high shear bond strength after thermal cycling. CONCLUSIONS: FL significantly increases the bonding efficacy of 6Y-PSZ and Li2SiO3 glass ceramics. Furthermore, Monobond Etch & Prime is effective for the surface treatment of Li2SiO3 glass ceramics. Therefore, FL can be used to effectively treat the surfaces of dental restorations in clinical settings, facilitating enhanced adhesion between the restoration and the tooth.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumCeramicsDental PorcelainDental BondingLasersSurface PropertiesShear StrengthMaterials Testing

Stichwörter der Autor:innen

Femtosecond laser irradiationHighly translucent zirconiaLithium disilicateShear bond strengthSurface roughness

Substanzen

Zirconiumlithia disilicateDental Porcelainzirconium oxideGlass ceramics

Autor:innen und Institutionen

  • Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
  • Department of Oral Devices and Materials, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
  • National Institute of Advanced Industrial Science and Technology (AIST), Health and Medical Research Institute, Takamatsu, Japan.
  • National Institute of Advanced Industrial Science and Technology (AIST), Research Institute for Advanced Electronics and Photonics, Tsukuba, Japan.
  • Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
  • Department of Basic Oral Health Engineering, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.

Zitieren

APA

Xu, K., Inokoshi, M., Yoshihara, K., Kakehata, M., Yashiro, H., Takahashi, R., Yamamoto, M., Kamijo, S., Ikeda, M., & Minakuchi, S. (2025). Bonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation. Journal of Prosthodontic Research, 69(3), 436-446. https://doi.org/10.2186/jpr.jpr_d_24_00134

Vancouver

Xu K, Inokoshi M, Yoshihara K, Kakehata M, Yashiro H, Takahashi R, et al. Bonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation. Journal of Prosthodontic Research. 2025;69(3):436-446. doi:10.2186/jpr.jpr_d_24_00134

BibTeX
@article{Xu2025,
  author = {Xu, Kaiqi and Inokoshi, Masanao and Yoshihara, Kumiko and Kakehata, Masayuki and Yashiro, Hidehiko and Takahashi, Rena and Yamamoto, Mao and Kamijo, Shingo and Ikeda, Masaomi and Minakuchi, Shunsuke},
  title = {Bonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation},
  journal = {Journal of Prosthodontic Research},
  year = {2025},
  volume = {69},
  number = {3},
  pages = {436--446},
  doi = {10.2186/jpr.jpr_d_24_00134}
}
Kostenlos starten →