EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Patient-Specific ACL Femoral Tunnel Guide from MRI

Iain Rankin, Haroon Rehman, Mark Frame

The Open Orthopaedics Journal · 28.02.2018 · 12 (1) · 59-68

DOI: 10.2174/1874325001812010059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Open Orthopaedics Journal, erschienen am 28.02.2018. Verfasst von Iain Rankin und 2 weiteren Autor:innen. Beteiligte Einrichtung: Aberdeen Royal Infirmary - Trauma and Orthopaedic Surgery, Foresterhill Aberdeen AB25 2ZN, United Kingdom of Great Britain and Northern Ireland. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Traditional ACL reconstruction with non-anatomic techniques can demonstrate unsatisfactory long-term outcomes with regards instability and the degenerative knee changes observed with these results. Anatomic ACL reconstruction attempts to closely reproduce the patient's individual anatomic characteristics with the aim of restoring knee kinematics, in order to improve patient short and long-term outcomes. We designed an arthroscopic, patient-specific, ACL femoral tunnel guide to aid anatomical placement of the ACL graft within the femoral tunnel.

Methods

The guide design was based on MRI scan of the subject's uninjured contralateral knee, identifying the femoral footprint and its anatomical position relative to the borders of the femoral articular cartilage. Image processing software was used to create a 3D computer aided design which was subsequently exported to a 3D-printing service.

Results

Transparent acrylic based photopolymer, PA220 plastic and 316L stainless steel patient-specific ACL femoral tunnel guides were created; the models produced were accurate with no statistical difference in size and positioning of the center of the ACL femoral footprint guide to MRI ( p =0.344, p =0.189, p =0.233 respectively). The guides aim to provide accurate marking of the starting point of the femoral tunnel in arthroscopic ACL reconstruction.

Conclusion

This study serves as a proof of concept for the accurate creation of 3D-printed patient-specific guides for the anatomical placement of the femoral tunnel during ACL reconstruction.

Schlagwörter

Stichwörter der Autor:innen

ACLAnatomicAnterior Cruciate LigamentAnterior Cruciate Ligament reconstructionPrinting, Three-dimensional, Arthroscopy

Autor:innen und Institutionen

  • Aberdeen Royal Infirmary - Trauma and Orthopaedic Surgery, Foresterhill Aberdeen AB25 2ZN, United Kingdom of Great Britain and Northern Ireland.
  • University Hospital Southampton NHS Foundation Trust Ringgold standard institution - Trauma and Orthopaedic Surgery Southampton, Southampton, United Kingdom of Great Britain and Northern Ireland.

Zitieren

APA

Rankin, I., Rehman, H., & Frame, M. (2018). 3D-Printed Patient-Specific ACL Femoral Tunnel Guide from MRI. The Open Orthopaedics Journal, 12(1), 59-68. https://doi.org/10.2174/1874325001812010059

Vancouver

Rankin I, Rehman H, Frame M. 3D-Printed Patient-Specific ACL Femoral Tunnel Guide from MRI. The Open Orthopaedics Journal. 2018;12(1):59-68. doi:10.2174/1874325001812010059

BibTeX
@article{Rankin2018,
  author = {Rankin, Iain and Rehman, Haroon and Frame, Mark},
  title = {3D-Printed Patient-Specific ACL Femoral Tunnel Guide from MRI},
  journal = {The Open Orthopaedics Journal},
  year = {2018},
  volume = {12},
  number = {1},
  pages = {59--68},
  doi = {10.2174/1874325001812010059}
}
Kostenlos starten →